_RocdecAv1SliceParams Struct Reference

Data Fields

_RocdecAv1SliceParams Struct Reference

Data Fields
uint32_t	slice_data_size
	The byte count of current tile in the bitstream buffer, starting from first byte of the buffer. It uses the name slice_data_size to be consistent with other codec, but actually means tile_data_size.
uint32_t	slice_data_offset
uint32_t	slice_data_flag
uint16_t	tile_row
uint16_t	tile_column
uint16_t	tg_start
uint16_t	tg_end
uint8_t	anchor_frame_idx
	anchor frame index for large scale tile. index into an array AnchorFrames of the frames that the tile uses for prediction. valid only when large_scale_tile equals 1.
uint16_t	tile_idx_in_tile_list
	tile index in the tile list. Valid only when large_scale_tile is enabled. Driver uses this field to decide the tile output location.
uint32_t	reserved [4]
	Reserved bytes for future use, must be zero.

Field Documentation

◆ slice_data_flag

uint32_t _RocdecAv1SliceParams::slice_data_flag

see VA_SLICE_DATA_FLAG_XXX definitions

◆ slice_data_offset

uint32_t _RocdecAv1SliceParams::slice_data_offset

offset to the first byte of the data buffer.

---

The documentation for this struct was generated from the following file:

• docs-6.3.1/api/rocdecode.h