RocdecVideoFormat Struct Reference#
ROCDEC_VIDEO_FORMAT structUsed in Parser callback API. More...
#include <docs-6.3.0/api/rocparser.h>
Data Fields | |
rocDecVideoCodec | codec |
struct { | |
uint32_t numerator | |
uint32_t denominator | |
} | frame_rate |
uint8_t | progressive_sequence |
uint8_t | bit_depth_luma_minus8 |
uint8_t | bit_depth_chroma_minus8 |
uint8_t | min_num_decode_surfaces |
uint32_t | coded_width |
uint32_t | coded_height |
struct { | |
int left | |
int top | |
int right | |
int bottom | |
} | display_area |
rocDecVideoChromaFormat | chroma_format |
uint32_t | bitrate |
struct { | |
int x | |
int y | |
} | display_aspect_ratio |
struct { | |
uint8_t video_format: 3 | |
uint8_t video_full_range_flag: 1 | |
uint8_t reserved_zero_bits: 4 | |
uint8_t color_primaries | |
uint8_t transfer_characteristics | |
uint8_t matrix_coefficients | |
} | video_signal_description |
uint32_t | seqhdr_data_length |
Detailed Description
ROCDEC_VIDEO_FORMAT struct
Used in Parser callback API.
Video format including raw sequence header information Used in rocDecCreateVideoParser API
Field Documentation
◆ bit_depth_chroma_minus8
uint8_t RocdecVideoFormat::bit_depth_chroma_minus8 |
OUT: high bit depth chroma. E.g, 2 for 10-bitdepth, 4 for 12-bitdepth
◆ bit_depth_luma_minus8
uint8_t RocdecVideoFormat::bit_depth_luma_minus8 |
OUT: high bit depth luma. E.g, 2 for 10-bitdepth, 4 for 12-bitdepth
◆ bitrate
uint32_t RocdecVideoFormat::bitrate |
OUT: video bitrate (bps, 0=unknown)
◆ bottom
int RocdecVideoFormat::bottom |
OUT: bottom position of display rect
◆ chroma_format
rocDecVideoChromaFormat RocdecVideoFormat::chroma_format |
OUT: Chroma format
◆ codec
rocDecVideoCodec RocdecVideoFormat::codec |
OUT: Compression format
◆ coded_height
uint32_t RocdecVideoFormat::coded_height |
OUT: coded frame height in pixels
◆ coded_width
uint32_t RocdecVideoFormat::coded_width |
OUT: coded frame width in pixels
◆ color_primaries
uint8_t RocdecVideoFormat::color_primaries |
OUT: chromaticity coordinates of source primaries
◆
struct { ... } RocdecVideoFormat::display_area |
area of the frame that should be displayed typical example: coded_width = 1920, coded_height = 1088 display_area = { 0,0,1920,1080 }
◆
struct { ... } RocdecVideoFormat::display_aspect_ratio |
OUT: Display Aspect Ratio = x:y (4:3, 16:9, etc)
◆
struct { ... } RocdecVideoFormat::frame_rate |
OUT: frame rate = numerator / denominator (for example: 30000/1001)
◆ left
int RocdecVideoFormat::left |
OUT: left position of display rect
◆ matrix_coefficients
uint8_t RocdecVideoFormat::matrix_coefficients |
OUT: used in deriving luma and chroma signals from RGB primaries
◆ min_num_decode_surfaces
uint8_t RocdecVideoFormat::min_num_decode_surfaces |
OUT: Minimum number of decode surfaces to be allocated for correct decoding. The client can send this value in num_decode_surfaces. This guarantees correct functionality and optimal video memory usage but not necessarily the best performance, which depends on the design of the overall application. The optimal number of decode surfaces (in terms of performance and memory utilization) should be decided by experimentation for each application, but it cannot go below min_num_decode_surfaces. If this value is used for num_decode_surfaces then it must be returned to parser during sequence callback.
◆ numerator
uint32_t RocdecVideoFormat::numerator |
< OUT: frame rate numerator (0 = unspecified or variable frame rate) OUT: frame rate denominator (0 = unspecified or variable frame rate)
◆ progressive_sequence
uint8_t RocdecVideoFormat::progressive_sequence |
OUT: 0=interlaced, 1=progressive
◆ reserved_zero_bits
uint8_t RocdecVideoFormat::reserved_zero_bits |
Reserved bits
◆ right
int RocdecVideoFormat::right |
OUT: right position of display rect
◆ seqhdr_data_length
uint32_t RocdecVideoFormat::seqhdr_data_length |
OUT: Additional bytes following (RocdecVideoFormatEx)
◆ top
int RocdecVideoFormat::top |
OUT: top position of display rect
◆ transfer_characteristics
uint8_t RocdecVideoFormat::transfer_characteristics |
OUT: opto-electronic transfer characteristic of the source picture
◆ video_format
uint8_t RocdecVideoFormat::video_format |
OUT: 0-Component, 1-PAL, 2-NTSC, 3-SECAM, 4-MAC, 5-Unspecified
◆ video_full_range_flag
uint8_t RocdecVideoFormat::video_full_range_flag |
OUT: indicates the black level and luma and chroma range
◆
struct { ... } RocdecVideoFormat::video_signal_description |
Video Signal Description Refer section E.2.1 (VUI parameters semantics) of H264 spec file
The documentation for this struct was generated from the following file:
- docs-6.3.0/api/rocparser.h