_RocdecReconfigureDecoderInfo Struct Reference

Data Fields

_RocdecReconfigureDecoderInfo Struct Reference

Data Fields
uint32_t	width
uint32_t	height
uint32_t	target_width
uint32_t	target_height
uint32_t	num_decode_surfaces
uint32_t	reserved_1 [12]
struct {
int16_t   left
int16_t   top
int16_t   right
int16_t   bottom
}	display_rect
struct {
int16_t   left
int16_t   top
int16_t   right
int16_t   bottom
}	target_rect
uint32_t	reserved_2 [11]

Field Documentation

◆ 

struct { ... } _RocdecReconfigureDecoderInfo::display_rect

IN: area of the frame that should be displayed

◆ height

uint32_t _RocdecReconfigureDecoderInfo::height

IN: Coded sequence height in pixels, MUST be < = max_height defined at RocDecoderCreateInfo

◆ num_decode_surfaces

uint32_t _RocdecReconfigureDecoderInfo::num_decode_surfaces

IN: Maximum number of internal decode surfaces

◆ reserved_1

uint32_t _RocdecReconfigureDecoderInfo::reserved_1[12]

Reserved for future use. Set to Zero

◆ reserved_2

uint32_t _RocdecReconfigureDecoderInfo::reserved_2[11]

Reserved for future use. Set to Zero

◆ target_height

uint32_t _RocdecReconfigureDecoderInfo::target_height

IN: Post Processed output height

◆ 

struct { ... } _RocdecReconfigureDecoderInfo::target_rect

IN: (for future use) target rectangle in the output frame (for aspect ratio conversion) if a null rectangle is specified, {0,0,target_width,target_height} will be used

◆ target_width

uint32_t _RocdecReconfigureDecoderInfo::target_width

IN: Post processed output width

◆ width

uint32_t _RocdecReconfigureDecoderInfo::width

IN: Coded sequence width in pixels, MUST be < = max_width defined at RocDecoderCreateInfo

---

The documentation for this struct was generated from the following file:

• /home/docs/checkouts/readthedocs.org/user_builds/advanced-micro-devices-rocdecode/checkouts/docs-6.1.1/api/rocdecode.h