AMD SMI CLI tool usage#
This tool is a command line interface (CLI) for manipulating and monitoring the
amdgpu kernel; it is intended to replace and deprecate the existing rocm_smi
CLI tool and gpuv-smi tool. The AMD SMI CLI tool uses Ctypes to call the
amd_smi_lib API.
When using the CLI tool, you should have at least one AMD GPU and the driver installed.
Disclaimer
The AMD SMI CLI tool is provided as an example code to aid the development of telemetry tools. The Python or C++ library is recommended as a robust data source.
Install the CLI Tool and Python library#
Refer to the installation instructions.
Get started#
The amd-smi command provides system management and monitoring capabilities for AMD hardware. When run without arguments, it reports the version and platform detected:
~$ amd-smi
usage: amd-smi [-h] ...
AMD System Management Interface | Version: 24.6.3.0 | ROCm version: 6.2.1 | Platform: Linux Baremetal
options:
-h, --help show this help message and exit
AMD-SMI Commands:
Descriptions:
version Display version information
list List GPU information
static Gets static information about the specified GPU
firmware (ucode) Gets firmware information about the specified GPU
bad-pages Gets bad page information about the specified GPU
metric Gets metric/performance information about the specified GPU
process Lists general process information running on the specified GPU
event Displays event information for the given GPU
topology Displays topology information of the devices
set Set options for devices
reset Reset options for devices
monitor (dmon) Monitor metrics for target devices
xgmi Displays xgmi information of the devices
Example commands:
amd-smi static --gpu 0
amd-smi metric
amd-smi process --gpu 0 1
amd-smi reset --gpureset --gpu all
Note
For command-specific help, use amd-smi [command] --help for see more detailed
usage information. See Commands.
For more detailed version information, use amd-smi version.
Commands#
The following are the help output for each command, providing quick reference details for usage.
amd-smi list#
Lists GPU information.
~$ amd-smi list --help
usage: amd-smi list [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]]
Lists all the devices on the system and the links between devices.
Lists all the sockets and for each socket, GPUs and/or CPUs associated to
that socket alongside some basic information for each device.
In virtualization environments, it can also list VFs associated to each
GPU with some basic information for each VF.
options:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi static#
Gets static information about the specified GPU. See the sample
output for amd-smi static.
~$ amd-smi static --help
usage: amd-smi static [-h] [-g GPU [GPU ...] | -U CPU [CPU ...]] [-a] [-b] [-V] [-d] [-v]
[-c] [-B] [-R] [-r] [-p] [-l] [-P] [-x] [-u] [-s] [-i]
[--json | --csv] [--file FILE] [--loglevel LEVEL]
If no GPU is specified, returns static information for all GPUs on the system.
If no static argument is provided, all static information will be displayed.
Static Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-a, --asic All asic information
-b, --bus All bus information
-V, --vbios All video bios information (if available)
-d, --driver Displays driver version
-v, --vram All vram information
-c, --cache All cache information
-B, --board All board information
-R, --process-isolation The process isolation status
-r, --ras Displays RAS features information
-p, --partition Partition information
-l, --limit All limit metric values (i.e. power and thermal limits)
-P, --policy The available DPM policy
-x, --xgmi-plpd The available XGMI per-link power down policy
-u, --numa All numa node information
CPU Arguments:
-s, --smu All SMU FW information
-i, --interface-ver Displays hsmp interface version
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi firmware#
Gets firmware information about the specified GPU.
~$ amd-smi firmware --help
usage: amd-smi firmware [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]] [-f]
If no GPU is specified, return firmware information for all GPUs on the system.
Firmware Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-f, --ucode-list, --fw-list All FW list information
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi bad-pages#
Gets bad page information about the specified GPU.
~$ amd-smi bad-pages --help
usage: amd-smi bad-pages [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]] [-p]
[-r] [-u]
If no GPU is specified, return bad page information for all GPUs on the system.
Bad Pages Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-p, --pending Displays all pending retired pages
-r, --retired Displays retired pages
-u, --un-res Displays unreservable pages
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi metric#
Gets metrics and performance information about the specified GPU.
~$ amd-smi metric --help
usage: amd-smi metric [-h] [-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]]
[-w INTERVAL] [-W TIME] [-i ITERATIONS] [-m] [-u] [-p] [-c] [-t]
[-P] [-e] [-k] [-f] [-C] [-o] [-l] [-x] [-E] [--cpu-power-metrics]
[--cpu-prochot] [--cpu-freq-metrics] [--cpu-c0-res]
[--cpu-lclk-dpm-level NBIOID] [--cpu-pwr-svi-telemtry-rails]
[--cpu-io-bandwidth IO_BW LINKID_NAME]
[--cpu-xgmi-bandwidth XGMI_BW LINKID_NAME] [--cpu-metrics-ver]
[--cpu-metrics-table] [--cpu-socket-energy] [--cpu-ddr-bandwidth]
[--cpu-temp] [--cpu-dimm-temp-range-rate DIMM_ADDR]
[--cpu-dimm-pow-consumption DIMM_ADDR]
[--cpu-dimm-thermal-sensor DIMM_ADDR] [--core-boost-limit]
[--core-curr-active-freq-core-limit] [--core-energy]
[--json | --csv] [--file FILE] [--loglevel LEVEL]
If no GPU is specified, returns metric information for all GPUs on the system.
If no metric argument is provided all metric information will be displayed.
Metric arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-w, --watch INTERVAL Reprint the command in a loop of INTERVAL seconds
-W, --watch_time TIME The total TIME to watch the given command
-i, --iterations ITERATIONS Total number of ITERATIONS to loop on the given command
-m, --mem-usage Memory usage per block
-u, --usage Displays engine usage information
-p, --power Current power usage
-c, --clock Average, max, and current clock frequencies
-t, --temperature Current temperatures
-P, --pcie Current PCIe speed, width, and replay count
-e, --ecc Total number of ECC errors
-k, --ecc-blocks Number of ECC errors per block
-f, --fan Current fan speed
-C, --voltage-curve Display voltage curve
-o, --overdrive Current GPU clock overdrive level
-l, --perf-level Current DPM performance level
-x, --xgmi-err XGMI error information since last read
-E, --energy Amount of energy consumed
CPU Arguments:
--cpu-power-metrics CPU power metrics
--cpu-prochot Displays prochot status
--cpu-freq-metrics Displays currentFclkMemclk frequencies and cclk frequency limit
--cpu-c0-res Displays C0 residency
--cpu-lclk-dpm-level NBIOID Displays lclk dpm level range. Requires socket ID and NBOID as inputs
--cpu-pwr-svi-telemtry-rails Displays svi based telemetry for all rails
--cpu-io-bandwidth IO_BW LINKID_NAME Displays current IO bandwidth for the selected CPU.
input parameters are bandwidth type(1) and link ID encodings
i.e. P2, P3, G0 - G7
--cpu-xgmi-bandwidth XGMI_BW LINKID_NAME Displays current XGMI bandwidth for the selected CPU
input parameters are bandwidth type(1,2,4) and link ID encodings
i.e. P2, P3, G0 - G7
--cpu-metrics-ver Displays metrics table version
--cpu-metrics-table Displays metric table
--cpu-socket-energy Displays socket energy for the selected CPU socket
--cpu-ddr-bandwidth Displays per socket max ddr bw, current utilized bw,
and current utilized ddr bw in percentage
--cpu-temp Displays cpu socket temperature
--cpu-dimm-temp-range-rate DIMM_ADDR Displays dimm temperature range and refresh rate
--cpu-dimm-pow-consumption DIMM_ADDR Displays dimm power consumption
--cpu-dimm-thermal-sensor DIMM_ADDR Displays dimm thermal sensor
CPU Core Arguments:
--core-boost-limit Get boost limit for the selected cores
--core-curr-active-freq-core-limit Get Current CCLK limit set per Core
--core-energy Displays core energy for the selected core
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi process#
Lists general process information running on the specified GPU.
~$ amd-smi process --help
usage: amd-smi process [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]]
[-w INTERVAL] [-W TIME] [-i ITERATIONS] [-G] [-e] [-p PID]
[-n NAME]
If no GPU is specified, returns information for all GPUs on the system.
If no process argument is provided all process information will be displayed.
Process arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-w, --watch INTERVAL Reprint the command in a loop of INTERVAL seconds
-W, --watch_time TIME The total TIME to watch the given command
-i, --iterations ITERATIONS Total number of ITERATIONS to loop on the given command
-G, --general pid, process name, memory usage
-e, --engine All engine usages
-p, --pid PID Gets all process information about the specified process based on Process ID
-n, --name NAME Gets all process information about the specified process based on Process Name.
If multiple processes have the same name information is returned for all of them.
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi event#
Displays event information for the given GPU.
~$ amd-smi event --help
usage: amd-smi event [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]]
If no GPU is specified, returns event information for all GPUs on the system.
Event Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi topology#
Displays topology information of the specified devices.
~$ amd-smi topology --help
usage: amd-smi topology [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]] [-a]
[-w] [-o] [-t] [-b]
If no GPU is specified, returns information for all GPUs on the system.
If no topology argument is provided all topology information will be displayed.
Topology arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-a, --access Displays link accessibility between GPUs
-w, --weight Displays relative weight between GPUs
-o, --hops Displays the number of hops between GPUs
-t, --link-type Displays the link type between GPUs
-b, --numa-bw Display max and min bandwidth between nodes
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi set#
Set options for specified devices.
~$ amd-smi set --help
usage: amd-smi set [-h] (-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]) [-f %]
[-l LEVEL] [-P SETPROFILE] [-d SCLKMAX] [-C PARTITION] [-M PARTITION]
[-o WATTS] [-p POLICY_ID] [-x POLICY_ID] [-R STATUS]
[--cpu-pwr-limit PWR_LIMIT] [--cpu-xgmi-link-width MIN_WIDTH MAX_WIDTH]
[--cpu-lclk-dpm-level NBIOID MIN_DPM MAX_DPM] [--cpu-pwr-eff-mode MODE]
[--cpu-gmi3-link-width MIN_LW MAX_LW] [--cpu-pcie-link-rate LINK_RATE]
[--cpu-df-pstate-range MAX_PSTATE MIN_PSTATE] [--cpu-enable-apb]
[--cpu-disable-apb DF_PSTATE] [--soc-boost-limit BOOST_LIMIT]
[--core-boost-limit BOOST_LIMIT] [--json | --csv] [--file FILE]
[--loglevel LEVEL]
A GPU must be specified to set a configuration.
A set argument must be provided; Multiple set arguments are accepted
Set Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-f, --fan % Set GPU fan speed (0-255 or 0-100%)
-l, --perf-level LEVEL Set performance level
-P, --profile SETPROFILE Set power profile level (#) or a quoted string of custom profile attributes
-d, --perf-determinism SCLKMAX Set GPU clock frequency limit and performance level to determinism to get minimal performance variation
-C, --compute-partition PARTITION Set one of the following the compute partition modes:
CPX, SPX, DPX, TPX, QPX
-M, --memory-partition PARTITION Set one of the following the memory partition modes:
NPS1, NPS2, NPS4, NPS8
-o, --power-cap WATTS Set power capacity limit
-p, --dpm-policy POLICY_ID Set the GPU DPM policy using policy id
-x, --xgmi-plpd POLICY_ID Set the GPU XGMI per-link power down policy using policy id
-R, --process-isolation STATUS Enable or disable the GPU process isolation: 0 for disable and 1 for enable.
CPU Arguments:
--cpu-pwr-limit PWR_LIMIT Set power limit for the given socket. Input parameter is power limit value.
--cpu-xgmi-link-width MIN_WIDTH MAX_WIDTH Set max and Min linkwidth. Input parameters are min and max link width values
--cpu-lclk-dpm-level NBIOID MIN_DPM MAX_DPM Sets the max and min dpm level on a given NBIO.
Input parameters are die_index, min dpm, max dpm.
--cpu-pwr-eff-mode MODE Sets the power efficency mode policy. Input parameter is mode.
--cpu-gmi3-link-width MIN_LW MAX_LW Sets max and min gmi3 link width range
--cpu-pcie-link-rate LINK_RATE Sets pcie link rate
--cpu-df-pstate-range MAX_PSTATE MIN_PSTATE Sets max and min df-pstates
--cpu-enable-apb Enables the DF p-state performance boost algorithm
--cpu-disable-apb DF_PSTATE Disables the DF p-state performance boost algorithm. Input parameter is DFPstate (0-3)
--soc-boost-limit BOOST_LIMIT Sets the boost limit for the given socket. Input parameter is socket BOOST_LIMIT value
CPU Core Arguments:
--core-boost-limit BOOST_LIMIT Sets the boost limit for the given core. Input parameter is core BOOST_LIMIT value
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi reset#
Reset options for specified devices.
~$ amd-smi reset --help
usage: amd-smi reset [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
(-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]) [-G] [-c]
[-f] [-p] [-x] [-d] [-C] [-M] [-o] [-l]
A GPU must be specified to reset a configuration.
A reset argument must be provided; Multiple reset arguments are accepted
Reset Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-G, --gpureset Reset the specified GPU
-c, --clocks Reset clocks and overdrive to default
-f, --fans Reset fans to automatic (driver) control
-p, --profile Reset power profile back to default
-x, --xgmierr Reset XGMI error counts
-d, --perf-determinism Disable performance determinism
-C, --compute-partition Reset compute partitions on the specified GPU
-M, --memory-partition Reset memory partitions on the specified GPU
-o, --power-cap Reset power capacity limit to max capable
-l, --run-shader SHADER_NAME Run the shader on processor. Only CLEANER shader can be used to clean up data in LDS/GPRs
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi monitor#
Monitor metrics for target devices.
~$ amd-smi monitor --help
usage: amd-smi monitor [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]]
[-w INTERVAL] [-W TIME] [-i ITERATIONS] [-p] [-t] [-u] [-m] [-n]
[-d] [-e] [-v] [-r] [-q]
Monitor a target device for the specified arguments.
If no arguments are provided, all arguments will be enabled.
Use the watch arguments to run continuously
Monitor Arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-w, --watch INTERVAL Reprint the command in a loop of INTERVAL seconds
-W, --watch_time TIME The total TIME to watch the given command
-i, --iterations ITERATIONS Total number of ITERATIONS to loop on the given command
-p, --power-usage Monitor power usage in Watts
-t, --temperature Monitor temperature in Celsius
-u, --gfx Monitor graphics utilization (%) and clock (MHz)
-m, --mem Monitor memory utilization (%) and clock (MHz)
-n, --encoder Monitor encoder utilization (%) and clock (MHz)
-d, --decoder Monitor decoder utilization (%) and clock (MHz)
-e, --ecc Monitor ECC single bit, ECC double bit, and PCIe replay error counts
-v, --vram-usage Monitor memory usage in MB
-r, --pcie Monitor PCIe bandwidth in Mb/s
-q, --process Enable Process information table below monitor output
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
amd-smi xgmi#
Displays XGMI information of specified devices.
~$ amd-smi xgmi --help
usage: amd-smi xgmi [-h] [--json | --csv] [--file FILE] [--loglevel LEVEL]
[-g GPU [GPU ...] | -U CPU [CPU ...] | -O CORE [CORE ...]] [-m]
If no GPU is specified, returns information for all GPUs on the system.
If no xgmi argument is provided all xgmi information will be displayed.
XGMI arguments:
-h, --help show this help message and exit
-g, --gpu GPU [GPU ...] Select a GPU ID, BDF, or UUID from the possible choices:
ID: 0 | BDF: 0000:01:00.0 | UUID: 7eff74a0-0000-1000-808f-7e20764e2714
ID: 1 | BDF: 0001:01:00.0 | UUID: b6ff74a0-0000-1000-80ae-7c8cefe1f084
ID: 2 | BDF: 0002:01:00.0 | UUID: 36ff74a0-0000-1000-8071-25d815189854
ID: 3 | BDF: 0003:01:00.0 | UUID: f4ff74a0-0000-1000-80c4-4c2be5e66537
all | Selects all devices
-U, --cpu CPU [CPU ...] Select a CPU ID from the possible choices:
ID: 0
ID: 1
ID: 2
ID: 3
all | Selects all devices
-O, --core CORE [CORE ...] Select a Core ID from the possible choices:
ID: 0 - 95
all | Selects all devices
-m, --metric Metric XGMI information
Command Modifiers:
--json Displays output in JSON format (human readable by default).
--csv Displays output in CSV format (human readable by default).
--file FILE Saves output into a file on the provided path (stdout by default).
--loglevel LEVEL Set the logging level from the possible choices:
DEBUG, INFO, WARNING, ERROR, CRITICAL
Example output from amd-smi static#
To gain a sense of the AMD SMI CLI’s output, the following block is sample output from the CLI tool:
~$ amd-smi static
CPU: 0
SMU:
FW_VERSION: 85.90.0
INTERFACE_VERSION:
PROTO VERSION: 6
CPU: 1
SMU:
FW_VERSION: 85.90.0
INTERFACE_VERSION:
PROTO VERSION: 6
CPU: 2
SMU:
FW_VERSION: 85.90.0
INTERFACE_VERSION:
PROTO VERSION: 6
CPU: 3
SMU:
FW_VERSION: 85.90.0
INTERFACE_VERSION:
PROTO VERSION: 6
GPU: 0
ASIC:
MARKET_NAME: MI300A
VENDOR_ID: 0x1002
VENDOR_NAME: Advanced Micro Devices Inc. [AMD/ATI]
SUBVENDOR_ID: 0x1002
DEVICE_ID: 0x74a0
REV_ID: 0x00
ASIC_SERIAL: 0x7E8F7E20764E2714
OAM_ID: 0
BUS:
BDF: 0000:01:00.0
MAX_PCIE_WIDTH: 16
MAX_PCIE_SPEED: 32 GT/s
PCIE_INTERFACE_VERSION: Gen 5
SLOT_TYPE: PCIE
VBIOS:
NAME: N/A
BUILD_DATE: N/A
PART_NUMBER: N/A
VERSION: N/A
LIMIT:
MAX_POWER: 550 W
MIN_POWER: 0 W
SOCKET_POWER: 550 W
SLOWDOWN_EDGE_TEMPERATURE: N/A
SLOWDOWN_HOTSPOT_TEMPERATURE: 100 °C
SLOWDOWN_VRAM_TEMPERATURE: 105 °C
SHUTDOWN_EDGE_TEMPERATURE: N/A
SHUTDOWN_HOTSPOT_TEMPERATURE: 110 °C
SHUTDOWN_VRAM_TEMPERATURE: 115 °C
DRIVER:
NAME: amdgpu
VERSION: 6.9.0-rc5+
BOARD:
MODEL_NUMBER: N/A
PRODUCT_SERIAL: N/A
FRU_ID: N/A
PRODUCT_NAME: Aqua Vanjaram [Instinct MI300A]
MANUFACTURER_NAME: Advanced Micro Devices, Inc. [AMD/ATI]
RAS:
EEPROM_VERSION: 0x0
PARITY_SCHEMA: DISABLED
SINGLE_BIT_SCHEMA: DISABLED
DOUBLE_BIT_SCHEMA: DISABLED
POISON_SCHEMA: ENABLED
ECC_BLOCK_STATE:
UMC: DISABLED
SDMA: ENABLED
GFX: ENABLED
MMHUB: ENABLED
ATHUB: DISABLED
PCIE_BIF: DISABLED
HDP: DISABLED
XGMI_WAFL: DISABLED
DF: DISABLED
SMN: DISABLED
SEM: DISABLED
MP0: DISABLED
MP1: DISABLED
FUSE: DISABLED
MCA: DISABLED
VCN: DISABLED
JPEG: DISABLED
IH: DISABLED
MPIO: DISABLED
PARTITION:
COMPUTE_PARTITION: SPX
MEMORY_PARTITION: NPS1
SOC_PSTATE:
NUM_SUPPORTED: 4
CURRENT_ID: 1
POLICIES:
POLICY_ID: 0
POLICY_DESCRIPTION: pstate_default
POLICY_ID: 1
POLICY_DESCRIPTION: soc_pstate_0
POLICY_ID: 2
POLICY_DESCRIPTION: soc_pstate_1
POLICY_ID: 3
POLICY_DESCRIPTION: soc_pstate_2
XGMI_PLPD:
NUM_SUPPORTED: 3
CURRENT_ID: 1
PLPDS:
POLICY_ID: 0
POLICY_DESCRIPTION: plpd_disallow
POLICY_ID: 1
POLICY_DESCRIPTION: plpd_default
POLICY_ID: 2
POLICY_DESCRIPTION: plpd_optimized
PROCESS_ISOLATION: N/A
NUMA:
NODE: 0
AFFINITY: 0
VRAM:
TYPE: HBM
VENDOR: N/A
SIZE: 64289 MB
CACHE_INFO:
CACHE_0:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 32 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 348
CACHE_1:
CACHE_PROPERTIES: INST_CACHE, SIMD_CACHE
CACHE_SIZE: 64 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 120
CACHE_2:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 4096 KB
CACHE_LEVEL: 2
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
CACHE_3:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 262144 KB
CACHE_LEVEL: 3
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
GPU: 1
ASIC:
MARKET_NAME: MI300A
VENDOR_ID: 0x1002
VENDOR_NAME: Advanced Micro Devices Inc. [AMD/ATI]
SUBVENDOR_ID: 0x1002
DEVICE_ID: 0x74a0
REV_ID: 0x00
ASIC_SERIAL: 0xB6AE7C8CEFE1F084
OAM_ID: 1
BUS:
BDF: 0001:01:00.0
MAX_PCIE_WIDTH: 16
MAX_PCIE_SPEED: 32 GT/s
PCIE_INTERFACE_VERSION: Gen 5
SLOT_TYPE: PCIE
VBIOS:
NAME: N/A
BUILD_DATE: N/A
PART_NUMBER: N/A
VERSION: N/A
LIMIT:
MAX_POWER: 550 W
MIN_POWER: 0 W
SOCKET_POWER: 550 W
SLOWDOWN_EDGE_TEMPERATURE: N/A
SLOWDOWN_HOTSPOT_TEMPERATURE: 100 °C
SLOWDOWN_VRAM_TEMPERATURE: 105 °C
SHUTDOWN_EDGE_TEMPERATURE: N/A
SHUTDOWN_HOTSPOT_TEMPERATURE: 110 °C
SHUTDOWN_VRAM_TEMPERATURE: 115 °C
DRIVER:
NAME: amdgpu
VERSION: 6.9.0-rc5+
BOARD:
MODEL_NUMBER: N/A
PRODUCT_SERIAL: N/A
FRU_ID: N/A
PRODUCT_NAME: Aqua Vanjaram [Instinct MI300A]
MANUFACTURER_NAME: Advanced Micro Devices, Inc. [AMD/ATI]
RAS:
EEPROM_VERSION: 0x0
PARITY_SCHEMA: DISABLED
SINGLE_BIT_SCHEMA: DISABLED
DOUBLE_BIT_SCHEMA: DISABLED
POISON_SCHEMA: ENABLED
ECC_BLOCK_STATE:
UMC: DISABLED
SDMA: ENABLED
GFX: ENABLED
MMHUB: ENABLED
ATHUB: DISABLED
PCIE_BIF: DISABLED
HDP: DISABLED
XGMI_WAFL: DISABLED
DF: DISABLED
SMN: DISABLED
SEM: DISABLED
MP0: DISABLED
MP1: DISABLED
FUSE: DISABLED
MCA: DISABLED
VCN: DISABLED
JPEG: DISABLED
IH: DISABLED
MPIO: DISABLED
PARTITION:
COMPUTE_PARTITION: SPX
MEMORY_PARTITION: NPS1
SOC_PSTATE:
NUM_SUPPORTED: 4
CURRENT_ID: 1
POLICIES:
POLICY_ID: 0
POLICY_DESCRIPTION: pstate_default
POLICY_ID: 1
POLICY_DESCRIPTION: soc_pstate_0
POLICY_ID: 2
POLICY_DESCRIPTION: soc_pstate_1
POLICY_ID: 3
POLICY_DESCRIPTION: soc_pstate_2
XGMI_PLPD:
NUM_SUPPORTED: 3
CURRENT_ID: 1
PLPDS:
POLICY_ID: 0
POLICY_DESCRIPTION: plpd_disallow
POLICY_ID: 1
POLICY_DESCRIPTION: plpd_default
POLICY_ID: 2
POLICY_DESCRIPTION: plpd_optimized
PROCESS_ISOLATION: N/A
NUMA:
NODE: 1
AFFINITY: 1
VRAM:
TYPE: HBM
VENDOR: N/A
SIZE: 64289 MB
CACHE_INFO:
CACHE_0:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 32 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 348
CACHE_1:
CACHE_PROPERTIES: INST_CACHE, SIMD_CACHE
CACHE_SIZE: 64 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 120
CACHE_2:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 4096 KB
CACHE_LEVEL: 2
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
CACHE_3:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 262144 KB
CACHE_LEVEL: 3
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
GPU: 2
ASIC:
MARKET_NAME: MI300A
VENDOR_ID: 0x1002
VENDOR_NAME: Advanced Micro Devices Inc. [AMD/ATI]
SUBVENDOR_ID: 0x1002
DEVICE_ID: 0x74a0
REV_ID: 0x00
ASIC_SERIAL: 0x367125D815189854
OAM_ID: 2
BUS:
BDF: 0002:01:00.0
MAX_PCIE_WIDTH: 16
MAX_PCIE_SPEED: 32 GT/s
PCIE_INTERFACE_VERSION: Gen 5
SLOT_TYPE: PCIE
VBIOS:
NAME: N/A
BUILD_DATE: N/A
PART_NUMBER: N/A
VERSION: N/A
LIMIT:
MAX_POWER: 550 W
MIN_POWER: 0 W
SOCKET_POWER: 550 W
SLOWDOWN_EDGE_TEMPERATURE: N/A
SLOWDOWN_HOTSPOT_TEMPERATURE: 100 °C
SLOWDOWN_VRAM_TEMPERATURE: 105 °C
SHUTDOWN_EDGE_TEMPERATURE: N/A
SHUTDOWN_HOTSPOT_TEMPERATURE: 110 °C
SHUTDOWN_VRAM_TEMPERATURE: 115 °C
DRIVER:
NAME: amdgpu
VERSION: 6.9.0-rc5+
BOARD:
MODEL_NUMBER: N/A
PRODUCT_SERIAL: N/A
FRU_ID: N/A
PRODUCT_NAME: Aqua Vanjaram [Instinct MI300A]
MANUFACTURER_NAME: Advanced Micro Devices, Inc. [AMD/ATI]
RAS:
EEPROM_VERSION: 0x0
PARITY_SCHEMA: DISABLED
SINGLE_BIT_SCHEMA: DISABLED
DOUBLE_BIT_SCHEMA: DISABLED
POISON_SCHEMA: ENABLED
ECC_BLOCK_STATE:
UMC: DISABLED
SDMA: ENABLED
GFX: ENABLED
MMHUB: ENABLED
ATHUB: DISABLED
PCIE_BIF: DISABLED
HDP: DISABLED
XGMI_WAFL: DISABLED
DF: DISABLED
SMN: DISABLED
SEM: DISABLED
MP0: DISABLED
MP1: DISABLED
FUSE: DISABLED
MCA: DISABLED
VCN: DISABLED
JPEG: DISABLED
IH: DISABLED
MPIO: DISABLED
PARTITION:
COMPUTE_PARTITION: SPX
MEMORY_PARTITION: NPS1
SOC_PSTATE:
NUM_SUPPORTED: 4
CURRENT_ID: 1
POLICIES:
POLICY_ID: 0
POLICY_DESCRIPTION: pstate_default
POLICY_ID: 1
POLICY_DESCRIPTION: soc_pstate_0
POLICY_ID: 2
POLICY_DESCRIPTION: soc_pstate_1
POLICY_ID: 3
POLICY_DESCRIPTION: soc_pstate_2
XGMI_PLPD:
NUM_SUPPORTED: 3
CURRENT_ID: 1
PLPDS:
POLICY_ID: 0
POLICY_DESCRIPTION: plpd_disallow
POLICY_ID: 1
POLICY_DESCRIPTION: plpd_default
POLICY_ID: 2
POLICY_DESCRIPTION: plpd_optimized
PROCESS_ISOLATION: N/A
NUMA:
NODE: 2
AFFINITY: 2
VRAM:
TYPE: HBM
VENDOR: N/A
SIZE: 64289 MB
CACHE_INFO:
CACHE_0:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 32 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 348
CACHE_1:
CACHE_PROPERTIES: INST_CACHE, SIMD_CACHE
CACHE_SIZE: 64 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 120
CACHE_2:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 4096 KB
CACHE_LEVEL: 2
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
CACHE_3:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 262144 KB
CACHE_LEVEL: 3
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
GPU: 3
ASIC:
MARKET_NAME: MI300A
VENDOR_ID: 0x1002
VENDOR_NAME: Advanced Micro Devices Inc. [AMD/ATI]
SUBVENDOR_ID: 0x1002
DEVICE_ID: 0x74a0
REV_ID: 0x00
ASIC_SERIAL: 0xF4C44C2BE5E66537
OAM_ID: 3
BUS:
BDF: 0003:01:00.0
MAX_PCIE_WIDTH: 16
MAX_PCIE_SPEED: 32 GT/s
PCIE_INTERFACE_VERSION: Gen 5
SLOT_TYPE: PCIE
VBIOS:
NAME: N/A
BUILD_DATE: N/A
PART_NUMBER: N/A
VERSION: N/A
LIMIT:
MAX_POWER: 550 W
MIN_POWER: 0 W
SOCKET_POWER: 550 W
SLOWDOWN_EDGE_TEMPERATURE: N/A
SLOWDOWN_HOTSPOT_TEMPERATURE: 100 °C
SLOWDOWN_VRAM_TEMPERATURE: 105 °C
SHUTDOWN_EDGE_TEMPERATURE: N/A
SHUTDOWN_HOTSPOT_TEMPERATURE: 110 °C
SHUTDOWN_VRAM_TEMPERATURE: 115 °C
DRIVER:
NAME: amdgpu
VERSION: 6.9.0-rc5+
BOARD:
MODEL_NUMBER: N/A
PRODUCT_SERIAL: N/A
FRU_ID: N/A
PRODUCT_NAME: Aqua Vanjaram [Instinct MI300A]
MANUFACTURER_NAME: Advanced Micro Devices, Inc. [AMD/ATI]
RAS:
EEPROM_VERSION: 0x0
PARITY_SCHEMA: DISABLED
SINGLE_BIT_SCHEMA: DISABLED
DOUBLE_BIT_SCHEMA: DISABLED
POISON_SCHEMA: ENABLED
ECC_BLOCK_STATE:
UMC: DISABLED
SDMA: ENABLED
GFX: ENABLED
MMHUB: ENABLED
ATHUB: DISABLED
PCIE_BIF: DISABLED
HDP: DISABLED
XGMI_WAFL: DISABLED
DF: DISABLED
SMN: DISABLED
SEM: DISABLED
MP0: DISABLED
MP1: DISABLED
FUSE: DISABLED
MCA: DISABLED
VCN: DISABLED
JPEG: DISABLED
IH: DISABLED
MPIO: DISABLED
PARTITION:
COMPUTE_PARTITION: SPX
MEMORY_PARTITION: NPS1
SOC_PSTATE:
NUM_SUPPORTED: 4
CURRENT_ID: 1
POLICIES:
POLICY_ID: 0
POLICY_DESCRIPTION: pstate_default
POLICY_ID: 1
POLICY_DESCRIPTION: soc_pstate_0
POLICY_ID: 2
POLICY_DESCRIPTION: soc_pstate_1
POLICY_ID: 3
POLICY_DESCRIPTION: soc_pstate_2
XGMI_PLPD:
NUM_SUPPORTED: 3
CURRENT_ID: 1
PLPDS:
POLICY_ID: 0
POLICY_DESCRIPTION: plpd_disallow
POLICY_ID: 1
POLICY_DESCRIPTION: plpd_default
POLICY_ID: 2
POLICY_DESCRIPTION: plpd_optimized
PROCESS_ISOLATION: N/A
NUMA:
NODE: 3
AFFINITY: 3
VRAM:
TYPE: HBM
VENDOR: N/A
SIZE: 64289 MB
CACHE_INFO:
CACHE_0:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 32 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 348
CACHE_1:
CACHE_PROPERTIES: INST_CACHE, SIMD_CACHE
CACHE_SIZE: 64 KB
CACHE_LEVEL: 1
MAX_NUM_CU_SHARED: 2
NUM_CACHE_INSTANCE: 120
CACHE_2:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 4096 KB
CACHE_LEVEL: 2
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1
CACHE_3:
CACHE_PROPERTIES: DATA_CACHE, SIMD_CACHE
CACHE_SIZE: 262144 KB
CACHE_LEVEL: 3
MAX_NUM_CU_SHARED: 228
NUM_CACHE_INSTANCE: 1