Clock, Power and Performance Control#
Functions | |
amdsmi_status_t | amdsmi_set_gpu_perf_level (amdsmi_processor_handle processor_handle, amdsmi_dev_perf_level_t perf_lvl) |
Set the PowerPlay performance level associated with the device with provided processor handle with the provided value. It is not supported on virtual machine guest. More... | |
amdsmi_status_t | amdsmi_set_gpu_overdrive_level (amdsmi_processor_handle processor_handle, uint32_t od) |
Set the overdrive percent associated with the device with provided processor handle with the provided value. See details for WARNING. It is not supported on virtual machine guest. More... | |
amdsmi_status_t | amdsmi_set_clk_freq (amdsmi_processor_handle processor_handle, amdsmi_clk_type_t clk_type, uint64_t freq_bitmask) |
Control the set of allowed frequencies that can be used for the specified clock. It is not supported on virtual machine guest. More... | |
amdsmi_status_t | amdsmi_get_soc_pstate (amdsmi_processor_handle processor_handle, amdsmi_dpm_policy_t *policy) |
Get the soc pstate policy for the processor. More... | |
amdsmi_status_t | amdsmi_set_soc_pstate (amdsmi_processor_handle processor_handle, uint32_t policy_id) |
Set the soc pstate policy for the processor. More... | |
amdsmi_status_t | amdsmi_get_xgmi_plpd (amdsmi_processor_handle processor_handle, amdsmi_dpm_policy_t *xgmi_plpd) |
Get the xgmi per-link power down policy parameter for the processor. More... | |
amdsmi_status_t | amdsmi_set_xgmi_plpd (amdsmi_processor_handle processor_handle, uint32_t plpd_id) |
Set the xgmi per-link power down policy parameter for the processor. More... | |
amdsmi_status_t | amdsmi_get_gpu_process_isolation (amdsmi_processor_handle processor_handle, uint32_t *pisolate) |
Get the status of the Process Isolation. More... | |
amdsmi_status_t | amdsmi_set_gpu_process_isolation (amdsmi_processor_handle processor_handle, uint32_t pisolate) |
Enable/disable the system Process Isolation. More... | |
amdsmi_status_t | amdsmi_clean_gpu_local_data (amdsmi_processor_handle processor_handle) |
Clean up local data in LDS/GPRs. More... | |
Detailed Description
These functions provide control over clock frequencies, power and performance.
Function Documentation
◆ amdsmi_set_gpu_perf_level()
amdsmi_status_t amdsmi_set_gpu_perf_level | ( | amdsmi_processor_handle | processor_handle, |
amdsmi_dev_perf_level_t | perf_lvl | ||
) |
Set the PowerPlay performance level associated with the device with provided processor handle with the provided value. It is not supported on virtual machine guest.
- Platform:
- gpu_bm_linux
Given a processor handle processor_handle
and an amdsmi_dev_perf_level_t perf_level
, this function will set the PowerPlay performance level for the device to the value perf_lvl
.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle [in] perf_lvl the value to which the performance level should be set
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_set_gpu_overdrive_level()
amdsmi_status_t amdsmi_set_gpu_overdrive_level | ( | amdsmi_processor_handle | processor_handle, |
uint32_t | od | ||
) |
Set the overdrive percent associated with the device with provided processor handle with the provided value. See details for WARNING. It is not supported on virtual machine guest.
- Platform:
- gpu_bm_linux
Given a processor handle processor_handle
and an overdrive level od
, this function will set the overdrive level for the device to the value od
. The overdrive level is an integer value between 0 and 20, inclusive, which represents the overdrive percentage; e.g., a value of 5 specifies an overclocking of 5%.
The overdrive level is specific to the gpu system clock.
The overdrive level is the percentage above the maximum Performance Level to which overclocking will be limited. The overclocking percentage does not apply to clock speeds other than the maximum. This percentage is limited to 20%.
******WARNING****** Operating your AMD GPU outside of official AMD specifications or outside of factory settings, including but not limited to the conducting of overclocking (including use of this overclocking software, even if such software has been directly or indirectly provided by AMD or otherwise affiliated in any way with AMD), may cause damage to your AMD GPU, system components and/or result in system failure, as well as cause other problems. DAMAGES CAUSED BY USE OF YOUR AMD GPU OUTSIDE OF OFFICIAL AMD SPECIFICATIONS OR OUTSIDE OF FACTORY SETTINGS ARE NOT COVERED UNDER ANY AMD PRODUCT WARRANTY AND MAY NOT BE COVERED BY YOUR BOARD OR SYSTEM MANUFACTURER'S WARRANTY. Please use this utility with caution.
- Parameters
-
[in] processor_handle a processor handle [in] od the value to which the overdrive level should be set
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_set_clk_freq()
amdsmi_status_t amdsmi_set_clk_freq | ( | amdsmi_processor_handle | processor_handle, |
amdsmi_clk_type_t | clk_type, | ||
uint64_t | freq_bitmask | ||
) |
Control the set of allowed frequencies that can be used for the specified clock. It is not supported on virtual machine guest.
- Platform:
- gpu_bm_linux
Given a processor handle processor_handle
, a clock type clk_type
, and a 64 bit bitmask freq_bitmask
, this function will limit the set of allowable frequencies. If a bit in freq_bitmask
has a value of 1, then the frequency (as ordered in an amdsmi_frequencies_t returned by amdsmi_get_clk_freq()) corresponding to that bit index will be allowed.
This function will change the performance level to AMDSMI_DEV_PERF_LEVEL_MANUAL in order to modify the set of allowable frequencies. Caller will need to set to AMDSMI_DEV_PERF_LEVEL_AUTO in order to get back to default state.
All bits with indices greater than or equal to amdsmi_frequencies_t::num_supported will be ignored.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle [in] clk_type the type of clock for which the set of frequencies will be modified [in] freq_bitmask A bitmask indicating the indices of the frequencies that are to be enabled (1) and disabled (0). Only the lowest amdsmi_frequencies_t.num_supported bits of this mask are relevant.
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_get_soc_pstate()
amdsmi_status_t amdsmi_get_soc_pstate | ( | amdsmi_processor_handle | processor_handle, |
amdsmi_dpm_policy_t * | policy | ||
) |
Get the soc pstate policy for the processor.
- Platform:
gpu_bm_linux
guest_1vf
Given a processor handle processor_handle
, this function will write current soc pstate policy settings to policy
. All the processors at the same socket will have the same policy.
- Parameters
-
[in] processor_handle a processor handle [in,out] policy the soc pstate policy for this processor. If this parameter is nullptr, this function will return AMDSMI_STATUS_INVAL
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_set_soc_pstate()
amdsmi_status_t amdsmi_set_soc_pstate | ( | amdsmi_processor_handle | processor_handle, |
uint32_t | policy_id | ||
) |
Set the soc pstate policy for the processor.
- Platform:
gpu_bm_linux
guest_1vf
Given a processor handle processor_handle
and a soc pstate policy policy_id
, this function will set the soc pstate policy for this processor. All the processors at the same socket will be set to the same policy.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle [in] policy_id the soc pstate policy id to set. The id is the id in amdsmi_dpm_policy_entry_t, which can be obtained by calling amdsmi_get_soc_pstate()
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_get_xgmi_plpd()
amdsmi_status_t amdsmi_get_xgmi_plpd | ( | amdsmi_processor_handle | processor_handle, |
amdsmi_dpm_policy_t * | xgmi_plpd | ||
) |
Get the xgmi per-link power down policy parameter for the processor.
- Platform:
- gpu_bm_linux
Given a processor handle processor_handle
, this function will write current xgmi plpd settings to policy
. All the processors at the same socket will have the same policy.
- Parameters
-
[in] processor_handle a processor handle [in,out] policy the xgmi plpd for this processor. If this parameter is nullptr, this function will return AMDSMI_STATUS_INVAL
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_set_xgmi_plpd()
amdsmi_status_t amdsmi_set_xgmi_plpd | ( | amdsmi_processor_handle | processor_handle, |
uint32_t | plpd_id | ||
) |
Set the xgmi per-link power down policy parameter for the processor.
- Platform:
- gpu_bm_linux
Given a processor handle processor_handle
and a dpm policy plpd_id
, this function will set the xgmi plpd for this processor. All the processors at the same socket will be set to the same policy.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle [in] xgmi_plpd_id the xgmi plpd id to set. The id is the id in amdsmi_dpm_policy_entry_t, which can be obtained by calling amdsmi_get_xgmi_plpd()
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_get_gpu_process_isolation()
amdsmi_status_t amdsmi_get_gpu_process_isolation | ( | amdsmi_processor_handle | processor_handle, |
uint32_t * | pisolate | ||
) |
Get the status of the Process Isolation.
- Platform:
gpu_bm_linux
guest_1vf
Given a processor handle processor_handle
, this function will write current process isolation status to pisolate
. The 0 is the process isolation disabled, and the 1 is the process isolation enabled.
- Parameters
-
[in] processor_handle a processor handle [in,out] pisolate the process isolation status. If this parameter is nullptr, this function will return AMDSMI_STATUS_INVAL
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_set_gpu_process_isolation()
amdsmi_status_t amdsmi_set_gpu_process_isolation | ( | amdsmi_processor_handle | processor_handle, |
uint32_t | pisolate | ||
) |
Enable/disable the system Process Isolation.
- Platform:
gpu_bm_linux
guest_1vf
Given a processor handle processor_handle
and a process isolation pisolate
, flag, this function will set the Process Isolation for this processor. The 0 is the process isolation disabled, and the 1 is the process isolation enabled.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle [in] pisolate the process isolation status to set.
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail
◆ amdsmi_clean_gpu_local_data()
amdsmi_status_t amdsmi_clean_gpu_local_data | ( | amdsmi_processor_handle | processor_handle | ) |
Clean up local data in LDS/GPRs.
- Platform:
gpu_bm_linux
guest_1vf
Given a processor handle processor_handle
, this function will clean the local data of this processor. This can be called between user logins to prevent information leak.
- Note
- This function requires root access
- Parameters
-
[in] processor_handle a processor handle
- Returns
- amdsmi_status_t | AMDSMI_STATUS_SUCCESS on success, non-zero on fail