Sampling the call stack#
ROCm Systems Profiler can use call-stack sampling
on a binary instrumented with either the rocprof-sys executable
or the rocprof-sys-sample executable.
For example, all of the following commands are effectively equivalent:
Binary rewrite with only the instrumentation necessary to start and stop sampling
rocprof-sys-instrument -M sampling -o foo.inst -- foo rocprof-sys-run -- ./foo.inst
Runtime instrumentation with only the instrumentation necessary to start and stop sampling
rocprof-sys-instrument -M sampling -- foo
No instrumentation required
rocprof-sys-sample -- foo
Note
Set ROCPROFSYS_USE_SAMPLING=ON to activate call-stack sampling when executing an instrumented binary.
All rocprof-sys-instrument -M sampling (subsequently referred to as “instrumented-sampling”)
does is wrap the main of the executable with initialization
before main starts and finalization after main ends.
This can be accomplished without instrumentation through a LD_PRELOAD
of a library containing a dynamic symbol wrapper around __libc_start_main.
The use of rocprof-sys-sample is recommended over
rocprof-sys-instrument -M sampling when binary instrumentation
is not necessary. This is for a number of reasons:
rocprof-sys-sampleprovides command-line options for controlling the ROCm Systems Profiler feature set instead of requiring configuration files or environment variablesDespite the fact that instrumented-sampling only requires inserting snippets around one function (
main), Dyninst does not have a feature for specifying that parsing and processing all the other symbols in the binary is unnecessary. In the best-case scenario when the target binary is relatively small, instrumented-sampling has a slightly slower launch time, but in the worst case scenarios it requires a significant amount of time and memory to launch.rocprof-sys-sampleis fully compatible with MPI. For example, the commandmpirun -n 2 rocprof-sys-sample -- foois valid, whereasmpirun -n 2 rocprof-sys-instrument -M sampling -- foois incompatible with some MPI distributions (particularly OpenMPI). This is because MPI prohibits forking within an MPI rank.When MPI and binary instrumentation are both involved, two steps are required: performing a binary rewrite of the executable and then using the instrumented executable in lieu of the original executable.
rocprof-sys-sampleis therefore much easier to use with MPI.
The rocprof-sys-sample executable#
View the help menu of rocprof-sys-sample with the -h / --help option:
$ rocprof-sys-sample --help
[rocprof-sys-sample] Usage: rocprof-sys-sample [ --help (count: 0, dtype: bool)
--version (count: 0, dtype: bool)
--monochrome (max: 1, dtype: bool)
--debug (max: 1, dtype: bool)
--verbose (count: 1)
--config (min: 0, dtype: filepath)
--output (min: 1)
--trace (max: 1, dtype: bool)
--profile (max: 1, dtype: bool)
--flat-profile (max: 1, dtype: bool)
--host (max: 1, dtype: bool)
--device (max: 1, dtype: bool)
--wait (count: 1)
--duration (count: 1)
--trace-file (count: 1, dtype: filepath)
--trace-buffer-size (count: 1, dtype: KB)
--trace-fill-policy (count: 1)
--trace-wait (count: 1)
--trace-duration (count: 1)
--trace-periods (min: 1)
--trace-clock-id (count: 1)
--profile-format (min: 1)
--profile-diff (min: 1)
--process-freq (count: 1)
--process-wait (count: 1)
--process-duration (count: 1)
--cpus (count: unlimited, dtype: int or range)
--gpus (count: unlimited, dtype: int or range)
--freq (count: 1)
--sampling-wait (count: 1)
--sampling-duration (count: 1)
--tids (min: 1)
--cputime (min: 0)
--realtime (min: 0)
--include (count: unlimited)
--exclude (count: unlimited)
--cpu-events (count: unlimited)
--gpu-events (count: unlimited)
--inlines (max: 1, dtype: bool)
--hsa-interrupt (count: 1, dtype: int)
]
Options:
-h, -?, --help Shows this page (count: 0, dtype: bool)
--version Prints the version and exit (count: 0, dtype: bool)
[DEBUG OPTIONS]
--monochrome Disable colorized output (max: 1, dtype: bool)
--debug Debug output (max: 1, dtype: bool)
-v, --verbose Verbose output (count: 1)
[GENERAL OPTIONS] These are options which are ubiquitously applied
-c, --config Configuration file (min: 0, dtype: filepath)
-o, --output Output path. Accepts 1-2 parameters corresponding to the output path and the output prefix (min: 1)
-T, --trace Generate a detailed trace (perfetto output) (max: 1, dtype: bool)
-P, --profile Generate a call-stack-based profile (conflicts with --flat-profile) (max: 1, dtype: bool)
-F, --flat-profile Generate a flat profile (conflicts with --profile) (max: 1, dtype: bool)
-H, --host Enable sampling host-based metrics for the process. E.g. CPU frequency, memory usage, etc. (max: 1, dtype: bool)
-D, --device Enable sampling device-based metrics for the process. E.g. GPU temperature, memory usage, etc. (max: 1, dtype: bool)
-w, --wait This option is a combination of '--trace-wait' and '--sampling-wait'. See the descriptions for those two options.
(count: 1)
-d, --duration This option is a combination of '--trace-duration' and '--sampling-duration'. See the descriptions for those two
options. (count: 1)
[TRACING OPTIONS] Specific options controlling tracing (i.e. deterministic measurements of every event)
--trace-file Specify the trace output filename. Relative filepath will be with respect to output path and output prefix. (count: 1,
dtype: filepath)
--trace-buffer-size Size limit for the trace output (in KB) (count: 1, dtype: KB)
--trace-fill-policy [ discard | ring_buffer ]
Policy for new data when the buffer size limit is reached:
- discard : new data is ignored
- ring_buffer : new data overwrites oldest data (count: 1)
--trace-wait Set the wait time (in seconds) before collecting trace and/or profiling data(in seconds). By default, the duration is
in seconds of realtime but that can changed via --trace-clock-id. (count: 1)
--trace-duration Set the duration of the trace and/or profile data collection (in seconds). By default, the duration is in seconds of
realtime but that can changed via --trace-clock-id. (count: 1)
--trace-periods More powerful version of specifying trace delay and/or duration. Format is one or more groups of: <DELAY>:<DURATION>,
<DELAY>:<DURATION>:<REPEAT>, and/or <DELAY>:<DURATION>:<REPEAT>:<CLOCK_ID>. (min: 1)
--trace-clock-id [ 0 (realtime|CLOCK_REALTIME)
1 (monotonic|CLOCK_MONOTONIC)
2 (cputime|CLOCK_PROCESS_CPUTIME_ID)
4 (monotonic_raw|CLOCK_MONOTONIC_RAW)
5 (realtime_coarse|CLOCK_REALTIME_COARSE)
6 (monotonic_coarse|CLOCK_MONOTONIC_COARSE)
7 (boottime|CLOCK_BOOTTIME) ]
Set the default clock ID for for trace delay/duration. Note: "cputime" is the *process* CPU time and might need to be
scaled based on the number of threads, i.e. 4 seconds of CPU-time for an application with 4 fully active threads would
equate to ~1 second of realtime. If this proves to be difficult to handle in practice, please file a feature request
for rocprof-sys to auto-scale based on the number of threads. (count: 1)
[PROFILE OPTIONS] Specific options controlling profiling (i.e. deterministic measurements which are aggregated into a summary)
--profile-format [ console | json | text ]
Data formats for profiling results (min: 1)
--profile-diff Generate a diff output b/t the profile collected and an existing profile from another run Accepts 1-2 parameters
corresponding to the input path and the input prefix (min: 1)
[HOST/DEVICE (PROCESS SAMPLING) OPTIONS]
Process sampling is background measurements for resources available to the entire process. These samples are not tied
to specific lines/regions of code
--process-freq Set the default host/device sampling frequency (number of interrupts per second) (count: 1)
--process-wait Set the default wait time (i.e. delay) before taking first host/device sample (in seconds of realtime) (count: 1)
--process-duration Set the duration of the host/device sampling (in seconds of realtime) (count: 1)
--cpus CPU IDs for frequency sampling. Supports integers and/or ranges (count: unlimited, dtype: int or range)
--gpus GPU IDs for SMI queries. Supports integers and/or ranges (count: unlimited, dtype: int or range)
[GENERAL SAMPLING OPTIONS] General options for timer-based sampling per-thread
-f, --freq Set the default sampling frequency (number of interrupts per second) (count: 1)
--sampling-wait Set the default wait time (i.e. delay) before taking first sample (in seconds). This delay time is based on the clock
of the sampler, i.e., a delay of 1 second for CPU-clock sampler may not equal 1 second of realtime (count: 1)
--sampling-duration Set the duration of the sampling (in seconds of realtime). I.e., it is possible (currently) to set a CPU-clock time
delay that exceeds the real-time duration... resulting in zero samples being taken (count: 1)
-t, --tids Specify the default thread IDs for sampling, where 0 (zero) is the main thread and each thread created by the target
application is assigned an atomically incrementing value. (min: 1)
[SAMPLING TIMER OPTIONS] These options determine the heuristic for deciding when to take a sample
--cputime Sample based on a CPU-clock timer (default). Accepts zero or more arguments:
0. Enables sampling based on CPU-clock timer.
1. Interrupts per second. E.g., 100 == sample every 10 milliseconds of CPU-time.
2. Delay (in seconds of CPU-clock time). I.e., how long each thread should wait before taking first sample.
3+ Thread IDs to target for sampling, starting at 0 (the main thread).
May be specified as index or range, e.g., '0 2-4' will be interpreted as:
sample the main thread (0), do not sample the first child thread but sample the 2nd, 3rd, and 4th child threads (min: 0)
--realtime Sample based on a real-clock timer. Accepts zero or more arguments:
0. Enables sampling based on real-clock timer.
1. Interrupts per second. E.g., 100 == sample every 10 milliseconds of realtime.
2. Delay (in seconds of real-clock time). I.e., how long each thread should wait before taking first sample.
3+ Thread IDs to target for sampling, starting at 0 (the main thread).
May be specified as index or range, e.g., '0 2-4' will be interpreted as:
sample the main thread (0), do not sample the first child thread but sample the 2nd, 3rd, and 4th child threads
When sampling with a real-clock timer, please note that enabling this will cause threads which are typically "idle"
to consume more resources since, while idle, the real-clock time increases (and therefore triggers taking samples)
whereas the CPU-clock time does not. (min: 0)
[BACKEND OPTIONS] These options control region information captured w/o sampling or instrumentation
-I, --include [ all | kokkosp | mpip | mutex-locks | ompt | rcclp | rocm-smi | rocprofiler | roctracer | roctx | rw-locks | spin-locks ]
Include data from these backends (count: unlimited)
-E, --exclude [ all | kokkosp | mpip | mutex-locks | ompt | rcclp | rocm-smi | rocprofiler | roctracer | roctx | rw-locks | spin-locks ]
Exclude data from these backends (count: unlimited)
[HARDWARE COUNTER OPTIONS] See also: rocprof-sys-avail -H
-C, --cpu-events Set the CPU hardware counter events to record (ref: `rocprof-sys-avail -H -c CPU`) (count: unlimited)
-G, --gpu-events Set the GPU hardware counter events to record (ref: `rocprof-sys-avail -H -c GPU`) (count: unlimited)
[MISCELLANEOUS OPTIONS]
-i, --inlines Include inline info in output when available (max: 1, dtype: bool)
--hsa-interrupt [ 0 | 1 ] Set the value of the HSA_ENABLE_INTERRUPT environment variable.
ROCm version 5.2 and older have a bug which will cause a deadlock if a sample is taken while waiting for the signal
that a kernel completed -- which happens when sampling with a real-clock timer. We require this option to be set to
when --realtime is specified to make users aware that, while this may fix the bug, it can have a negative impact on
performance.
Values:
0 avoid triggering the bug, potentially at the cost of reduced performance
1 do not modify how ROCm is notified about kernel completion (count: 1, dtype: int)
The general syntax for separating ROCm Systems Profiler command-line arguments from the
following application arguments
is consistent with the LLVM style of using a stand-alone double hyphen (--).
All arguments preceding the double hyphen
are interpreted as belonging to ROCm Systems Profiler and all arguments following it
are interpreted as the
application and its arguments. The double hyphen is only necessary when passing
command-line arguments to a target
which also uses hyphens. For example, you can run rocprof-sys-sample ls, but
to run ls -la, use rocprof-sys-sample -- ls -la.
Configuring the ROCm Systems Profiler runtime options
establishes the precedence of environment variable values over values specified
in the configuration files. This enables
you to configure the ROCm Systems Profiler runtime to your preferred default behavior
in a file such as ~/.rocprof-sys.cfg and then easily override
those settings in the command line, for example, ROCPROFSYS_ENABLED=OFF rocprof-sys-sample -- foo.
Similarly, the command-line arguments passed to rocprof-sys-sample take precedence
over environment variables.
All of the command-line options above correlate to one or more configuration
settings, for example, --cpu-events correlates to the ROCPROFSYS_PAPI_EVENTS configuration variable.
rocprof-sys-sample processes the arguments and outputs a summary of its configuration
before running the target application.
The following snippets show how rocprof-sys-sample runs with various environment updates.
This snippet shows the environment updates when
rocprof-sys-sampleis invoked with no arguments:$ rocprof-sys-sample -- ./parallel-overhead-locks 30 4 100 HSA_TOOLS_LIB=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 HSA_TOOLS_REPORT_LOAD_FAILURE=1 LD_PRELOAD=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 ROCPROFSYS_USE_PROCESS_SAMPLING=false ROCPROFSYS_USE_SAMPLING=true OMP_TOOL_LIBRARIES=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 ROCP_TOOL_LIB=/opt/rocprofiler-systems/lib/librocprof-sys.so.1.7.1
The next snippet shows the environment updates when
rocprof-sys-sampleenables profiling, tracing, host process-sampling, device process-sampling, and all the available backends:$ rocprof-sys-sample -PTDH -I all -- ./parallel-overhead-locks 30 4 100 HSA_TOOLS_LIB=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 HSA_TOOLS_REPORT_LOAD_FAILURE=1 KOKKOS_PROFILE_LIBRARY=/opt/rocprofiler-systems/lib/librocprof-sys.so.1.7.1 LD_PRELOAD=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 ROCPROFSYS_CPU_FREQ_ENABLED=true ROCPROFSYS_TRACE_THREAD_LOCKS=true ROCPROFSYS_TRACE_THREAD_RW_LOCKS=true ROCPROFSYS_TRACE_THREAD_SPIN_LOCKS=true ROCPROFSYS_USE_KOKKOSP=true ROCPROFSYS_USE_MPIP=true ROCPROFSYS_USE_OMPT=true ROCPROFSYS_TRACE=true ROCPROFSYS_USE_PROCESS_SAMPLING=true ROCPROFSYS_USE_RCCLP=true ROCPROFSYS_USE_ROCM_SMI=true ROCPROFSYS_USE_ROCPROFILER=true ROCPROFSYS_USE_ROCTRACER=true ROCPROFSYS_USE_ROCTX=true ROCPROFSYS_USE_SAMPLING=true ROCPROFSYS_PROFILE=true OMP_TOOL_LIBRARIES=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 ROCP_TOOL_LIB=/opt/rocprofiler-systems/lib/librocprof-sys.so.1.7.1 ...
The final snippet shows the environment updates when
rocprof-sys-sampleenables profiling, tracing, host process-sampling, and device process-sampling, sets the output path torocprof-sys-outputand the output prefix to%tag%, and disables all the available backends:$ rocprof-sys-sample -PTDH -E all -o rocprof-sys-output %tag% -- ./parallel-overhead-locks 30 4 100 LD_PRELOAD=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.7.1 ROCPROFSYS_CPU_FREQ_ENABLED=true ROCPROFSYS_OUTPUT_PATH=rocprof-sys-output ROCPROFSYS_OUTPUT_PREFIX=%tag% ROCPROFSYS_TRACE_THREAD_LOCKS=false ROCPROFSYS_TRACE_THREAD_RW_LOCKS=false ROCPROFSYS_TRACE_THREAD_SPIN_LOCKS=false ROCPROFSYS_USE_KOKKOSP=false ROCPROFSYS_USE_MPIP=false ROCPROFSYS_USE_OMPT=false ROCPROFSYS_TRACE=true ROCPROFSYS_USE_PROCESS_SAMPLING=true ROCPROFSYS_USE_RCCLP=false ROCPROFSYS_USE_ROCM_SMI=false ROCPROFSYS_USE_ROCPROFILER=false ROCPROFSYS_USE_ROCTRACER=false ROCPROFSYS_USE_ROCTX=false ROCPROFSYS_USE_SAMPLING=true ROCPROFSYS_PROFILE=true ...
An rocprof-sys-sample example#
Here is the full output from the previous
rocprof-sys-sample -PTDH -E all -o rocprof-sys-output %tag% -- ./parallel-overhead-locks 30 4 100 command:
$ rocprof-sys-sample -PTDH -E all -o rocprof-sys-output %tag% -c -- ./parallel-overhead-locks 30 4 100
LD_PRELOAD=/opt/rocprofiler-systems/lib/librocprof-sys-dl.so.1.11.3
ROCPROFSYS_CONFIG_FILE=
ROCPROFSYS_CPU_FREQ_ENABLED=true
ROCPROFSYS_OUTPUT_PATH=rocprof-sys-output
ROCPROFSYS_OUTPUT_PREFIX=%tag%
ROCPROFSYS_PROFILE=true
ROCPROFSYS_TRACE=true
ROCPROFSYS_TRACE_THREAD_LOCKS=false
ROCPROFSYS_TRACE_THREAD_RW_LOCKS=false
ROCPROFSYS_TRACE_THREAD_SPIN_LOCKS=false
ROCPROFSYS_USE_KOKKOSP=false
ROCPROFSYS_USE_MPIP=false
ROCPROFSYS_USE_OMPT=false
ROCPROFSYS_USE_PROCESS_SAMPLING=true
ROCPROFSYS_USE_RCCLP=false
ROCPROFSYS_USE_ROCM_SMI=false
ROCPROFSYS_USE_ROCPROFILER=false
ROCPROFSYS_USE_ROCTRACER=false
ROCPROFSYS_USE_ROCTX=false
ROCPROFSYS_USE_SAMPLING=true
[rocprof-sys][dl][1785877] rocprofsys_main
[rocprof-sys][1785877][rocprofsys_init_tooling] Instrumentation mode: Sampling
__
_ __ ___ ___ _ __ _ __ ___ / _| ___ _ _ ___
| '__| / _ \ / __| | '_ \ | '__| / _ \ | |_ _____ / __| | | | | / __|
| | | (_) | | (__ | |_) | | | | (_) | | _| |_____| \__ \ | |_| | \__ \
|_| \___/ \___| | .__/ |_| \___/ |_| |___/ \__, | |___/
|_| |___/
rocprof-sys v1.11.2 (rev: 2586b74db8bf335742600010b8d9f1ce8da9cf89, compiler: GNU v11.4.1, rocm: v6.1.x)
[988.958] perfetto.cc:58649 Configured tracing session 1, #sources:1, duration:0 ms, #buffers:1, total buffer size:1024000 KB, total sessions:1, uid:0 session name: ""
[parallel-overhead-locks] Threads: 4
[parallel-overhead-locks] Iterations: 100
[parallel-overhead-locks] fibonacci(30)...
[1] number of iterations: 100
[2] number of iterations: 100
[3] number of iterations: 100
[4] number of iterations: 100
[parallel-overhead-locks] fibonacci(30) x 4 = 409221992
[parallel-overhead-locks] number of mutex locks = 400
[rocprof-sys][1785877][0][rocprofsys_finalize] finalizing...
[rocprof-sys][1785877][0][rocprofsys_finalize]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877 : 0.294342 sec wall_clock, 4.776 MB peak_rss, 3.170 MB page_rss, 0.990000 sec cpu_clock, 336.3 % cpu_util [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877/thread/0 : 0.291535 sec wall_clock, 0.002619 sec thread_cpu_clock, 0.9 % thread_cpu_util, 4.776 MB peak_rss [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877/thread/1 : 0.271353 sec wall_clock, 0.222572 sec thread_cpu_clock, 82.0 % thread_cpu_util, 4.200 MB peak_rss [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877/thread/2 : 0.238218 sec wall_clock, 0.206405 sec thread_cpu_clock, 86.6 % thread_cpu_util, 3.432 MB peak_rss [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877/thread/3 : 0.209459 sec wall_clock, 0.193415 sec thread_cpu_clock, 92.3 % thread_cpu_util, 2.472 MB peak_rss [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize] rocprof-sys/process/1785877/thread/4 : 0.212029 sec wall_clock, 0.211694 sec thread_cpu_clock, 99.8 % thread_cpu_util, 1.152 MB peak_rss [laps: 1]
[rocprof-sys][1785877][0][rocprofsys_finalize]
[rocprof-sys][1785877][0][rocprofsys_finalize] Finalizing perfetto...
[rocprof-sys][1785877][perfetto]> Outputting '/home/user/code/rocprofiler-systems/build-release/rocprofiler-systems-output/2024-07-15_16.21/parallel-overhead-locksperfetto-trace-1785877.proto' (39.12 KB / 0.04 MB / 0.00 GB)... Done
[rocprof-sys][1785877][wall_clock]> Outputting 'rocprof-sys-output/2024-07-15_16.21/parallel-overhead-lockswall_clock-1785877.json'
[rocprof-sys][1785877][wall_clock]> Outputting 'rocprof-sys-output/2024-07-15_16.21/parallel-overhead-lockswall_clock-1785877.txt'
[rocprof-sys][1785877][metadata]> Outputting 'rocprof-sys-output/2024-07-15_16.21/parallel-overhead-locksmetadata-1785877.json' and 'rocprof-sys-output/2024-07-15_16.21/parallel-overhead-locksfunctions-1785877.json'
[rocprof-sys][1785877][0][rocprofsys_finalize] Finalized: 0.054582 sec wall_clock, 0.000 MB peak_rss, -1.798 MB page_rss, 0.040000 sec cpu_clock, 73.3 % cpu_util
[989.312] perfetto.cc:60128 Tracing session 1 ended, total sessions:0