Install AMD Simulation

Install AMD Simulation#

2026-07-14

1 min read time

Applies to Linux

This topic provides brief guidance and recommendations on setting up a ROCm-enabled environment for simulation components.

Note

For the 25.10 release, the AMD Simulation components must be installed separately and have unique hardware requirements. Ensure you have the system requirements listed below to proceed.

System requirements#

To use Taichi Lang, you need the following prerequisites:

  • ROCm version: 6.3.2 (recommended)

  • Operating system: Ubuntu 22.04

  • GPU platform: AMD Instinct™ MI250X, MI210

  • Python: 3.10.12

To use GSplat (Gaussian splatting), you need the following prerequisites:

  • ROCm version: 6.4.3 (recommended)

  • Operating system: Ubuntu 24.04

  • GPU platform: AMD Instinct™ MI300X

  • PyTorch: 2.6 (ROCm-enabled)

  • Python: 3.12.0

Install AMD Simulation components#

Each AMD Simulation 25.10 component must be separately installed as needed. The installation instructions for each component can be found as follows: