Scan

Scan#

Configuring the kernel#

scan#

template<unsigned int BlockSize, unsigned int ItemsPerThread, bool UseLookback, ::rocprim::block_load_method BlockLoadMethod, ::rocprim::block_store_method BlockStoreMethod, ::rocprim::block_scan_algorithm BlockScanMethod, unsigned int SizeLimit = std::numeric_limits<unsigned int>::max()> struct scan_config#

Configuration of device-level scan primitives.

Template Parameters:

BlockSize – - number of threads in a block.
ItemsPerThread – - number of items processed by each thread.
UseLookback – - whether to use lookback scan or reduce-then-scan algorithm.
BlockLoadMethod – - method for loading input values.
StoreLoadMethod – - method for storing values.
BlockScanMethod – - algorithm for block scan.
SizeLimit – - limit on the number of items for a single scan kernel launch.

Subclassed by rocprim::detail::default_scan_by_key_config_base< Key, Value >, rocprim::detail::default_scan_config_base< Value >

scan_by_key#

template<unsigned int BlockSize, unsigned int ItemsPerThread, bool UseLookback, ::rocprim::block_load_method BlockLoadMethod, ::rocprim::block_store_method BlockStoreMethod, ::rocprim::block_scan_algorithm BlockScanMethod, unsigned int SizeLimit = std::numeric_limits<unsigned int>::max()> struct scan_by_key_config#

Configuration of device-level scan-by-key operation.

Template Parameters:

BlockSize – - number of threads in a block.
ItemsPerThread – - number of items processed by each thread.
UseLookback – - whether to use lookback scan or reduce-then-scan algorithm.
BlockLoadMethod – - method for loading input values.
StoreLoadMethod – - method for storing values.
BlockScanMethod – - algorithm for block scan.
SizeLimit – - limit on the number of items for a single scan kernel launch.

scan#

inclusive#

template<class Config = default_config, class InputIterator, class OutputIterator, class BinaryFunction = ::rocprim::plus<typename std::iterator_traits<InputIterator>::value_type>> inline hipError_t rocprim::inclusive_scan(void *temporary_storage, size_t &storage_size, InputIterator input, OutputIterator output, const size_t size, BinaryFunction scan_op = BinaryFunction(), const hipStream_t stream = 0, bool debug_synchronous = false)#

Parallel inclusive scan primitive for device level.

inclusive_scan function performs a device-wide inclusive prefix scan operation using binary scan_op operator.

Overview

Supports non-commutative scan operators. However, a scan operator should be associative. When used with non-associative functions the results may be non-deterministic and/or vary in precision.
Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by input and output must have at least size elements.
By default, the input type is used for accumulation. A custom type can be specified using rocprim::transform_iterator, see the example below.

Example

In this example a device-level inclusive sum operation is performed on an array of integer values (shorts are scanned into ints).

#include <rocprim/rocprim.hpp>

// Prepare input and output (declare pointers, allocate device memory etc.)
size_t input_size;    // e.g., 8
short * input;        // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
int * output;         // empty array of 8 elements

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, input_size, rocprim::plus<int>()
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan
rocprim::inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, input_size, rocprim::plus<int>()
);
// output: [1, 3, 6, 10, 15, 21, 28, 36]

The same example as above, but now a custom accumulator type is specified.

#include <rocprim/rocprim.hpp>

size_t input_size;
short * input;
int * output;

// Use a transform iterator to specifiy a custom accumulator type
auto input_iterator = rocprim::make_transform_iterator(
    input, [] __device__ (T in) { return static_cast<int>(in); });

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Use the transform iterator
rocprim::inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input_iterator, output, input_size, rocprim::plus<int>()
);

hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

rocprim::inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input_iterator, output, input_size, rocprim::plus<int>()
);

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
InputIterator – - random-access iterator type of the input range. Must meet the requirements of a C++ InputIterator concept. It can be a simple pointer type.
OutputIterator – - random-access iterator type of the output range. Must meet the requirements of a C++ OutputIterator concept. It can be a simple pointer type.
BinaryFunction – - type of binary function used for scan. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
input – [in] - iterator to the first element in the range to scan.
output – [out] - iterator to the first element in the output range. It can be same as input.
size – [in] - number of element in the input range.
scan_op – [in] - binary operation function object that will be used for scan. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. Default is BinaryFunction().
stream – [in] - [optional] HIP stream object. Default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. Default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

exclusive#

template<class Config = default_config, class InputIterator, class OutputIterator, class InitValueType, class BinaryFunction = ::rocprim::plus<typename std::iterator_traits<InputIterator>::value_type>> inline hipError_t rocprim::exclusive_scan(void *temporary_storage, size_t &storage_size, InputIterator input, OutputIterator output, const InitValueType initial_value, const size_t size, BinaryFunction scan_op = BinaryFunction(), const hipStream_t stream = 0, bool debug_synchronous = false)#

Parallel exclusive scan primitive for device level.

exclusive_scan function performs a device-wide exclusive prefix scan operation using binary scan_op operator.

Overview

Supports non-commutative scan operators. However, a scan operator should be associative. When used with non-associative functions the results may be non-deterministic and/or vary in precision.
Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by input and output must have at least size elements.

Example

In this example a device-level exclusive min-scan operation is performed on an array of integer values (shorts are scanned into ints) using custom operator.

#include <rocprim/rocprim.hpp>

// custom scan function
auto min_op =
    [] __device__ (int a, int b) -> int
    {
        return a < b ? a : b;
    };

// Prepare input and output (declare pointers, allocate device memory etc.)
size_t input_size;    // e.g., 8
short * input;        // e.g., [4, 7, 6, 2, 5, 1, 3, 8]
int * output;         // empty array of 8 elements
int start_value;      // e.g., 9

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::exclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, start_value, input_size, min_op
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan
rocprim::exclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, start_value, input_size, min_op
);
// output: [9, 4, 7, 6, 2, 2, 1, 1]

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
InputIterator – - random-access iterator type of the input range. Must meet the requirements of a C++ InputIterator concept. It can be a simple pointer type.
OutputIterator – - random-access iterator type of the output range. Must meet the requirements of a C++ OutputIterator concept. It can be a simple pointer type.
InitValueType – - type of the initial value.
BinaryFunction – - type of binary function used for scan. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
input – [in] - iterator to the first element in the range to scan.
output – [out] - iterator to the first element in the output range. It can be same as input.
initial_value – [in] - initial value to start the scan. A rocpim::future_value may be passed to use a value that will be later computed.
size – [in] - number of element in the input range.
scan_op – [in] - binary operation function object that will be used for scan. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. The default value is BinaryFunction().
stream – [in] - [optional] HIP stream object. The default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. The default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

segmented, inclusive#

template<class Config = default_config, class InputIterator, class OutputIterator, class OffsetIterator, class BinaryFunction = ::rocprim::plus<typename std::iterator_traits<InputIterator>::value_type>> inline hipError_t rocprim::segmented_inclusive_scan(void *temporary_storage, size_t &storage_size, InputIterator input, OutputIterator output, unsigned int segments, OffsetIterator begin_offsets, OffsetIterator end_offsets, BinaryFunction scan_op = BinaryFunction(), hipStream_t stream = 0, bool debug_synchronous = false)#

Parallel segmented inclusive scan primitive for device level.

segmented_inclusive_scan function performs a device-wide inclusive scan operation across multiple sequences from input using binary scan_op operator.

Overview

Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by input and output must have at least size elements.
Ranges specified by begin_offsets and end_offsets must have at least segments elements. They may use the same sequence offsets of at least segments + 1 elements: offsets for begin_offsets and offsets + 1 for end_offsets.

Example

In this example a device-level segmented inclusive min-scan operation is performed on an array of integer values (shorts are scanned into ints) using custom operator.

#include <rocprim/rocprim.hpp>

// custom scan function
auto min_op =
    [] __device__ (int a, int b) -> int
    {
        return a < b ? a : b;
    };

// Prepare input and output (declare pointers, allocate device memory etc.)
short * input;        // e.g., [4, 7, 6, 2, 5, 1, 3, 8]
int   * output;       // empty array of 8 elements
size_t segments;      // e.g., 3
int * offsets;        // e.g. [0, 2, 4, 8]

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::segmented_inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, segments, offsets, offsets + 1, min_op
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan
rocprim::inclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, segments, offsets, offsets + 1, min_op
);
// output: [4, 4, 6, 2, 5, 1, 1, 1]

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
InputIterator – - random-access iterator type of the input range. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
OutputIterator – - random-access iterator type of the output range. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
OffsetIterator – - random-access iterator type of segment offsets. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
BinaryFunction – - type of binary function used for scan operation. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
input – [in] - iterator to the first element in the range to scan.
output – [out] - iterator to the first element in the output range.
segments – [in] - number of segments in the input range.
begin_offsets – [in] - iterator to the first element in the range of beginning offsets.
end_offsets – [in] - iterator to the first element in the range of ending offsets.
scan_op – [in] - binary operation function object that will be used for scan. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. The default value is BinaryFunction().
stream – [in] - [optional] HIP stream object. The default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. The default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

segmented, exclusive#

template<class Config = default_config, class InputIterator, class OutputIterator, class OffsetIterator, class InitValueType, class BinaryFunction = ::rocprim::plus<typename std::iterator_traits<InputIterator>::value_type>> inline hipError_t rocprim::segmented_exclusive_scan(void *temporary_storage, size_t &storage_size, InputIterator input, OutputIterator output, unsigned int segments, OffsetIterator begin_offsets, OffsetIterator end_offsets, const InitValueType initial_value, BinaryFunction scan_op = BinaryFunction(), hipStream_t stream = 0, bool debug_synchronous = false)#

Parallel segmented exclusive scan primitive for device level.

segmented_exclusive_scan function performs a device-wide exclusive scan operation across multiple sequences from input using binary scan_op operator.

Overview

Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by input and output must have at least size elements.
Ranges specified by begin_offsets and end_offsets must have at least segments elements. They may use the same sequence offsets of at least segments + 1 elements: offsets for begin_offsets and offsets + 1 for end_offsets.

Example

In this example a device-level segmented exclusive min-scan operation is performed on an array of integer values (shorts are scanned into ints) using custom operator.

#include <rocprim/rocprim.hpp>

// custom scan function
auto min_op =
    [] __device__ (int a, int b) -> int
    {
        return a < b ? a : b;
    };

// Prepare input and output (declare pointers, allocate device memory etc.)
int start_value;      // e.g., 9
short * input;        // e.g., [4, 7, 6, 2, 5, 1, 3, 8]
int   * output;       // empty array of 8 elements
size_t segments;      // e.g., 3
int * offsets;        // e.g. [0, 2, 4, 8]

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::segmented_exclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, segments, offsets, offsets + 1
    start_value, min_op
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan
rocprim::exclusive_scan(
    temporary_storage_ptr, temporary_storage_size_bytes,
    input, output, segments, offsets, offsets + 1
    start_value, min_op
);
// output: [9, 4, 9, 6, 9, 5, 1, 1]

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
InputIterator – - random-access iterator type of the input range. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
OutputIterator – - random-access iterator type of the output range. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
OffsetIterator – - random-access iterator type of segment offsets. Must meet the requirements of a C++ RandomAccessIterator concept. It can be a simple pointer type.
InitValueType – - type of the initial value.
BinaryFunction – - type of binary function used for scan operation. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
input – [in] - iterator to the first element in the range to scan.
output – [out] - iterator to the first element in the output range.
segments – [in] - number of segments in the input range.
begin_offsets – [in] - iterator to the first element in the range of beginning offsets.
end_offsets – [in] - iterator to the first element in the range of ending offsets.
initial_value – [in] - initial value to start the scan.
scan_op – [in] - binary operation function object that will be used for scan. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. The default value is BinaryFunction().
stream – [in] - [optional] HIP stream object. The default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. The default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

scan_by_key#

inclusive#

template<typename Config = default_config, typename KeysInputIterator, typename ValuesInputIterator, typename ValuesOutputIterator, typename BinaryFunction = ::rocprim::plus<typename std::iterator_traits<ValuesInputIterator>::value_type>, typename KeyCompareFunction = ::rocprim::equal_to<typename std::iterator_traits<KeysInputIterator>::value_type>> inline hipError_t rocprim::inclusive_scan_by_key(void *const temporary_storage, size_t &storage_size, const KeysInputIterator keys_input, const ValuesInputIterator values_input, const ValuesOutputIterator values_output, const size_t size, const BinaryFunction scan_op = BinaryFunction(), const KeyCompareFunction key_compare_op = KeyCompareFunction(), const hipStream_t stream = 0, const bool debug_synchronous = false)#

Parallel inclusive scan-by-key primitive for device level.

inclusive_scan_by_key function performs a device-wide inclusive prefix scan-by-key operation using binary scan_op operator.

Overview

Supports non-commutative scan operators. However, a scan operator should be associative. When used with non-associative functions the results may be non-deterministic and/or vary in precision.
Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by keys_input, values_input, and values_output must have at least size elements.

Example

In this example a device-level inclusive sum-by-key operation is performed on an array of integer values (shorts are scanned into ints).

#include <rocprim/rocprim.hpp>

// Prepare input and output (declare pointers, allocate device memory etc.)
size_t size;           // e.g., 8
int *   keys_input;    // e.g., [1, 1, 2, 2, 3, 3, 3, 5]
short * values_input;  // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
int *   values_output; // empty array of 8 elements

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::inclusive_scan_by_key(
    temporary_storage_ptr, temporary_storage_size_bytes,
    keys_input, values_input,
    values_output, size,
    rocprim::plus<int>()
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan-by-key
rocprim::inclusive_scan_by_key(
    temporary_storage_ptr, temporary_storage_size_bytes,
    keys_input, values_input,
    values_output, size,
    rocprim::plus<int>()
);
// values_output: [1, 2, 3, 7, 5, 11, 18, 8]

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
KeysInputIterator – - random-access iterator type of the input range. It can be a simple pointer type.
ValuesInputIterator – - random-access iterator type of the input range. It can be a simple pointer type.
ValuesOutputIterator – - random-access iterator type of the output range. It can be a simple pointer type.
BinaryFunction – - type of binary function used for scan. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.
KeyCompareFunction – - type of binary function used to determine keys equality. Default type is rocprim::equal_to<T>, where T is a value_type of KeysInputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
keys_input – [in] - iterator to the first element in the range of keys.
values_input – [in] - iterator to the first element in the range of values to scan.
values_output – [out] - iterator to the first element in the output value range.
size – [in] - number of element in the input range.
scan_op – [in] - binary operation function object that will be used for scanning input values. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. Default is BinaryFunction().
key_compare_op – [in] - binary operation function object that will be used to determine keys equality. The signature of the function should be equivalent to the following: bool f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. Default is KeyCompareFunction().
stream – [in] - [optional] HIP stream object. Default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. Default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

exclusive#

template<typename Config = default_config, typename KeysInputIterator, typename ValuesInputIterator, typename ValuesOutputIterator, typename InitialValueType, typename BinaryFunction = ::rocprim::plus<typename std::iterator_traits<ValuesInputIterator>::value_type>, typename KeyCompareFunction = ::rocprim::equal_to<typename std::iterator_traits<KeysInputIterator>::value_type>> inline hipError_t rocprim::exclusive_scan_by_key(void *const temporary_storage, size_t &storage_size, const KeysInputIterator keys_input, const ValuesInputIterator values_input, const ValuesOutputIterator values_output, const InitialValueType initial_value, const size_t size, const BinaryFunction scan_op = BinaryFunction(), const KeyCompareFunction key_compare_op = KeyCompareFunction(), const hipStream_t stream = 0, const bool debug_synchronous = false)#

Parallel exclusive scan-by-key primitive for device level.

inclusive_scan_by_key function performs a device-wide exclusive prefix scan-by-key operation using binary scan_op operator.

Overview

Supports non-commutative scan operators. However, a scan operator should be associative. When used with non-associative functions the results may be non-deterministic and/or vary in precision.
Returns the required size of temporary_storage in storage_size if temporary_storage in a null pointer.
Ranges specified by keys_input, values_input, and values_output must have at least size elements.

Example

In this example a device-level inclusive sum-by-key operation is performed on an array of integer values (shorts are scanned into ints).

#include <rocprim/rocprim.hpp>

// Prepare input and output (declare pointers, allocate device memory etc.)
size_t size;           // e.g., 8
int *   keys_input;    // e.g., [1, 1, 1, 2, 2, 3, 3, 4]
short * values_input;  // e.g., [1, 2, 3, 4, 5, 6, 7, 8]
int start_value;       // e.g., 9
int *   values_output; // empty array of 8 elements

size_t temporary_storage_size_bytes;
void * temporary_storage_ptr = nullptr;
// Get required size of the temporary storage
rocprim::exclusive_scan_by_key(
    temporary_storage_ptr, temporary_storage_size_bytes,
    keys_input, values_input,
    values_output, start_value,
    size,rocprim::plus<int>()
);

// allocate temporary storage
hipMalloc(&temporary_storage_ptr, temporary_storage_size_bytes);

// perform scan-by-key
rocprim::exclusive_scan_by_key(
    temporary_storage_ptr, temporary_storage_size_bytes,
    keys_input, values_input,
    values_output, start_value,
    size,rocprim::plus<int>()
);
// values_output: [9, 10, 12, 9, 13, 9, 15, 9]

Template Parameters:

Config – - [optional] configuration of the primitive. It can be scan_config or a custom class with the same members.
KeysInputIterator – - random-access iterator type of the input range. It can be a simple pointer type.
ValuesInputIterator – - random-access iterator type of the input range. It can be a simple pointer type.
ValuesOutputIterator – - random-access iterator type of the output range. It can be a simple pointer type.
InitValueType – - type of the initial value.
BinaryFunction – - type of binary function used for scan. Default type is rocprim::plus<T>, where T is a value_type of InputIterator.
KeyCompareFunction – - type of binary function used to determine keys equality. Default type is rocprim::equal_to<T>, where T is a value_type of KeysInputIterator.

Parameters:

temporary_storage – [in] - pointer to a device-accessible temporary storage. When a null pointer is passed, the required allocation size (in bytes) is written to storage_size and function returns without performing the scan operation.
storage_size – [inout] - reference to a size (in bytes) of temporary_storage.
keys_input – [in] - iterator to the first element in the range of keys.
values_input – [in] - iterator to the first element in the range of values to scan.
values_output – [out] - iterator to the first element in the output value range.
initial_value – [in] - initial value to start the scan. A rocpim::future_value may be passed to use a value that will be later computed.
size – [in] - number of element in the input range.
scan_op – [in] - binary operation function object that will be used for scanning input values. The signature of the function should be equivalent to the following: T f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. Default is BinaryFunction().
key_compare_op – [in] - binary operation function object that will be used to determine keys equality. The signature of the function should be equivalent to the following: bool f(const T &a, const T &b);. The signature does not need to have const &, but function object must not modify the objects passed to it. Default is KeyCompareFunction().
stream – [in] - [optional] HIP stream object. Default is 0 (default stream).
debug_synchronous – [in] - [optional] If true, synchronization after every kernel launch is forced in order to check for errors. Default value is false.

Returns:

hipSuccess (0) after successful scan; otherwise a HIP runtime error of type hipError_t.

Scan

Contents

Scan#

Configuring the kernel#

scan#

scan_by_key#

scan#

inclusive#

exclusive#

segmented, inclusive#

segmented, exclusive#

scan_by_key#

inclusive#

exclusive#