Installing RCCL

Installing RCCL#

Requirements#

ROCm supported GPUs
ROCm stack installed on the system (HIP runtime & HIP-Clang)

Quickstart RCCL Build#

RCCL directly depends on HIP runtime plus the HIP-Clang compiler, which are part of the ROCm software stack. For ROCm installation instructions, see ROCm/ROCm. The root of this repository has a helper script install.sh to build and install RCCL with a single command. It hard-codes configurations that can be specified through invoking cmake directly, but it’s a great way to get started quickly and can serve as an example of how to build/install RCCL.

To build the library using the install script:#

./install.sh

For more info on build options/flags when using the install script, use the following:

./install.sh --help

RCCL build & installation helper script options:

   --address-sanitizer     Build with address sanitizer enabled
-d|--dependencies          Install RCCL depdencencies
   --debug                 Build debug library
   --enable_backtrace      Build with custom backtrace support
   --disable-colltrace     Build without collective trace
   --disable-msccl-kernel  Build without MSCCL kernels
-f|--fast                  Quick-build RCCL (local gpu arch only, no backtrace, and collective trace support)
-h|--help                  Prints this help message
-i|--install               Install RCCL library (see --prefix argument below)
-j|--jobs                  Specify how many parallel compilation jobs to run ($nproc by default)
-l|--local_gpu_only        Only compile for local GPU architecture
   --amdgpu_targets        Only compile for specified GPU architecture(s). For multiple targets, seperate by ';' (builds for all supported GPU architectures by default)
   --no_clean              Don't delete files if they already exist
   --npkit-enable          Compile with npkit enabled
   --roctx-enable          Compile with roctx enabled (example usage: rocprof --roctx-trace ./rccl-program)
-p|--package_build         Build RCCL package
   --prefix                Specify custom directory to install RCCL to (default: `/opt/rocm`)
   --rm-legacy-include-dir Remove legacy include dir Packaging added for file/folder reorg backward compatibility
   --run_tests_all         Run all rccl unit tests (must be built already)
-r|--run_tests_quick       Run small subset of rccl unit tests (must be built already)
   --static                Build RCCL as a static library instead of shared library
-t|--tests_build           Build rccl unit tests, but do not run
   --time-trace            Plot the build time of RCCL (requires `ninja-build` package installed on the system)
   --verbose               Show compile commands

Tip

By default, RCCL builds for all GPU targets defined in DEFAULT_GPUS in CMakeLists.txt. To target specific GPU(s), and potentially reduce build time, use --amdgpu_targets as a ; separated string listing GPU(s) to target.

Manual build#

To build the library using CMake:#

$ git clone https://github.com/ROCm/rccl.git
$ cd rccl
$ mkdir build
$ cd build
$ cmake ..
$ make -j 16      # Or some other suitable number of parallel jobs

You may substitute an installation path of your own choosing by passing CMAKE_INSTALL_PREFIX. For example:

$ cmake -DCMAKE_INSTALL_PREFIX=$PWD/rccl-install ..

Note

Ensure rocm-cmake is installed, apt install rocm-cmake.

To build the RCCL package and install package:#

Assuming you have already cloned this repository and built the library as shown in the previous section:

$ cd rccl/build
$ make package
$ sudo dpkg -i *.deb

RCCL package install requires sudo/root access because it creates a directory called “rccl” under /opt/rocm/. This is an optional step and RCCL can be used directly by including the path containing librccl.so.

Enabling peer-to-peer transport#

In order to enable peer-to-peer access on machines with PCIe-connected GPUs, the HSA environment variable HSA_FORCE_FINE_GRAIN_PCIE=1 is required to be set, on top of requiring GPUs that support peer-to-peer access and proper large BAR addressing support.

Testing RCCL#

There are rccl unit tests implemented with the Googletest framework in RCCL. The rccl unit tests require Googletest 1.10 or higher to build and execute properly (installed with the -d option to install.sh). To invoke the rccl unit tests, go to the build folder, then the test subfolder, and execute the appropriate rccl unit test executable(s).

rccl unit test names are now of the format:

CollectiveCall.[Type of test]

Filtering of rccl unit tests should be done with environment variable and by passing the --gtest_filter command line flag:

UT_DATATYPES=ncclBfloat16 UT_REDOPS=prod ./rccl-UnitTests --gtest_filter="AllReduce.C*"

This will run only AllReduce correctness tests with float16 datatype. A list of available filtering environment variables appears at the top of every run. See https://google.github.io/googletest/advanced.html#running-a-subset-of-the-tests for more information on how to form more advanced filters.

There are also other performance and error-checking tests for RCCL. These are maintained separately at ROCm/rccl-tests.

Note

See the rccl-tests/README for more information on how to build and run those tests.

NPKit#

RCCL integrates NPKit, a profiler framework that enables collecting fine-grained trace events in RCCL components, especially in giant collective GPU kernels. Please check NPKit sample workflow for RCCL as a fully automated usage example. It also provides good templates for the following manual instructions. To manually build RCCL with NPKit enabled, pass -DNPKIT_FLAGS="-DENABLE_NPKIT -DENABLE_NPKIT_...(other NPKit compile-time switches)" with cmake command. All NPKit compile-time switches are declared in the RCCL code base as macros with prefix ENABLE_NPKIT_, and they control which information will be collected. Also note that currently NPKit only supports collecting non-overlapped events on GPU, and -DNPKIT_FLAGS should follow this rule.

To manually run RCCL with NPKit enabled, environment variable NPKIT_DUMP_DIR needs to be set as the NPKit event dump directory. Also note that currently NPKit only supports 1 GPU per process. To manually analyze NPKit dump results, please leverage npkit_trace_generator.py.

MSCCL#

RCCL integrates MSCCL to leverage the highly efficient GPU-GPU communication primitives for collective operations. Thanks to Microsoft Corporation for collaborating with us on this project.

MSCCL uses XMLs for different collective algorithms on different architectures. RCCL collectives can leverage those algorithms once the corresponding XML has been provided by the user. The XML files contain the sequence of send-recv and reduction operations to be executed by the kernel. On MI300X, MSCCL is enabled by default. On other platforms, the users may have to enable this by setting RCCL_MSCCL_FORCE_ENABLE=1. MSCCL will only be used if every rank belongs to a unique process.

Improving performance on MI300 when using less than 8 GPUs#

On a system with 8*MI300X GPUs, each pair of GPUs are connected with dedicated XGMI links in a fully-connected topology. So, for collective operations, one can achieve good performance when all 8 GPUs (and all XGMI links) are used. When using less than 8 GPUs, one can only achieve a fraction of the potential bandwidth on the system. But, if your workload warrants using less than 8 MI300 GPUs on a system, you can set the run-time variable NCCL_MIN_NCHANNELS to increase the number of channels.

For example: export NCCL_MIN_NCHANNELS=32

Increasing the number of channels can be beneficial to performance, but it also increases GPU utilization for collective operations. Additionally, we have pre-defined higher number of channels when using only 2 GPUs or 4 GPUs on a 8*MI300 system. Here, RCCL will use 32 channels for the 2 MI300 GPUs scenario and 24 channels for the 4 MI300 GPUs scenario.