Preconditioner functions

This module contains all sparse preconditioners.

The sparse preconditioners describe manipulations on a matrix in sparse format to obtain a sparse preconditioner matrix.

hipsparseXbsrilu02_zeroPivot()

hipsparseStatus_t hipsparseXbsrilu02_zeroPivot(hipsparseHandle_t handle, bsrilu02Info_t info, int *position)

hipsparseXbsrilu02_zeroPivot returns HIPSPARSE_STATUS_ZERO_PIVOT, if either a structural or numerical zero has been found during hipsparseXbsrilu02_analysis() or hipsparseXbsrilu02() computation. The first zero pivot \(j\) at \(A_{j,j}\) is stored in position, using same index base as the BSR matrix.

position can be in host or device memory. If no zero pivot has been found, position is set to -1 and HIPSPARSE_STATUS_SUCCESS is returned instead.

Note

If a zero pivot is found, position \(=j\) means that either the diagonal block \(A_{j,j}\) is missing (structural zero) or the diagonal block \(A_{j,j}\) is not invertible (numerical zero).

Note

hipsparseXbsrilu02_zeroPivot is a blocking function. It might influence performance negatively.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• position – [inout] pointer to zero pivot \(j\), can be in host or device memory.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info or position pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_ZERO_PIVOT – zero pivot has been found.

hipsparseXbsrilu02_numericBoost()

hipsparseStatus_t hipsparseSbsrilu02_numericBoost(hipsparseHandle_t handle, bsrilu02Info_t info, int enable_boost, double *tol, float *boost_val)

hipsparseStatus_t hipsparseDbsrilu02_numericBoost(hipsparseHandle_t handle, bsrilu02Info_t info, int enable_boost, double *tol, double *boost_val)

hipsparseStatus_t hipsparseCbsrilu02_numericBoost(hipsparseHandle_t handle, bsrilu02Info_t info, int enable_boost, double *tol, hipComplex *boost_val)

hipsparseStatus_t hipsparseZbsrilu02_numericBoost(hipsparseHandle_t handle, bsrilu02Info_t info, int enable_boost, double *tol, hipDoubleComplex *boost_val)

hipsparseXbsrilu02_numericBoost enables the user to replace a numerical value in an incomplete LU factorization. tol is used to determine whether a numerical value is replaced by boost_val, such that \(A_{j,j} = \text{boost_val}\) if \(\text{tol} \ge \left|A_{j,j}\right|\).

Note

The boost value is enabled by setting enable_boost to 1 or disabled by setting enable_boost to 0.

Note

tol and boost_val can be in host or device memory.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• enable_boost – [in] enable/disable numeric boost.

• tol – [in] tolerance to determine whether a numerical value is replaced or not.

• boost_val – [in] boost value to replace a numerical value.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info, tol or boost_val pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXbsrilu02_bufferSize()

hipsparseStatus_t hipsparseSbsrilu02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, float *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDbsrilu02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, double *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCbsrilu02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipComplex *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZbsrilu02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipDoubleComplex *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseXbsrilu02_bufferSize returns the size of the temporary storage buffer in bytes that is required by hipsparseXbsrilu02_analysis() and hipsparseXbsrilu02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specifies whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrSortedValA – [in] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrSortedRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrSortedColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseSbsrilu02_analysis(), hipsparseDbsrilu02_analysis(), hipsparseCbsrilu02_analysis(), hipsparseZbsrilu02_analysis(), hipsparseSbsrilu02(), hipsparseDbsrilu02(), hipsparseCbsrilu02() and hipsparseZbsrilu02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrSortedValA, bsrSortedRowPtrA, bsrSortedColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXbsrilu02_analysis()

hipsparseStatus_t hipsparseSbsrilu02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, float *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDbsrilu02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, double *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCbsrilu02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipComplex *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZbsrilu02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipDoubleComplex *bsrSortedValA, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseXbsrilu02_analysis performs the analysis step for hipsparseXbsrilu02(). It is expected that this function will be executed only once for a given matrix.

Note

If the matrix sparsity pattern changes, the gathered information will become invalid.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specified whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrSortedValA – [in] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrSortedRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrSortedColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [out] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrSortedValA, bsrSortedRowPtrA, bsrSortedColIndA, info or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXbsrilu02()

hipsparseStatus_t hipsparseSbsrilu02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, float *bsrSortedValA_valM, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDbsrilu02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, double *bsrSortedValA_valM, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCbsrilu02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipComplex *bsrSortedValA_valM, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZbsrilu02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipDoubleComplex *bsrSortedValA_valM, const int *bsrSortedRowPtrA, const int *bsrSortedColIndA, int blockDim, bsrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

Incomplete LU factorization with 0 fill-ins and no pivoting using BSR storage format.

hipsparseXbsrilu02 computes the incomplete LU factorization with 0 fill-ins and no pivoting of a sparse \(mb \times mb\) BSR matrix \(A\), such that

\[ A \approx LU \]

Computing the above incomplete LU factorization requires three steps to complete. First, the user determines the size of the required temporary storage buffer by calling hipsparseXbsrilu02_bufferSize(). Once this buffer size has been determined, the user allocates the buffer and passes it to hipsparseXbsrilu02_analysis(). This will perform analysis on the sparsity pattern of the matrix. Finally, the user calls hipsparseXbsrilu02 to perform the actual factorization. The calculation of the buffer size and the analysis of the sparse matrix only need to be performed once for a given sparsity pattern while the factorization can be repeatedly applied to multiple matrices having the same sparsity pattern. Once all calls to hipsparseXbsrilu02() are complete, the temporary buffer can be deallocated.

hipsparseXbsrilu02 reports the first zero pivot (either numerical or structural zero). The zero pivot status can be obtained by calling hipsparseXbsrilu02_zeroPivot().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specified whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrSortedValA_valM – [inout] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrSortedRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrSortedColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [in] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrSortedValA_valM, bsrSortedRowPtrA or bsrSortedColIndA pointer is invalid.

• HIPSPARSE_STATUS_ARCH_MISMATCH – the device is not supported.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXcsrilu02_zeroPivot()

hipsparseStatus_t hipsparseXcsrilu02_zeroPivot(hipsparseHandle_t handle, csrilu02Info_t info, int *position)

hipsparseXcsrilu02_zeroPivot returns HIPSPARSE_STATUS_ZERO_PIVOT, if either a structural or numerical zero has been found during hipsparseXcsrilu02() computation. The first zero pivot \(j\) at \(A_{j,j}\) is stored in position, using same index base as the CSR matrix.

position can be in host or device memory. If no zero pivot has been found, position is set to -1 and HIPSPARSE_STATUS_SUCCESS is returned instead.

Note

hipsparseXcsrilu02_zeroPivot is a blocking function. It might influence performance negatively.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• position – [inout] pointer to zero pivot \(j\), can be in host or device memory.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info or position pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_ZERO_PIVOT – zero pivot has been found.

hipsparseXcsrilu02_numericBoost()

hipsparseStatus_t hipsparseScsrilu02_numericBoost(hipsparseHandle_t handle, csrilu02Info_t info, int enable_boost, double *tol, float *boost_val)

hipsparseStatus_t hipsparseDcsrilu02_numericBoost(hipsparseHandle_t handle, csrilu02Info_t info, int enable_boost, double *tol, double *boost_val)

hipsparseStatus_t hipsparseCcsrilu02_numericBoost(hipsparseHandle_t handle, csrilu02Info_t info, int enable_boost, double *tol, hipComplex *boost_val)

hipsparseStatus_t hipsparseZcsrilu02_numericBoost(hipsparseHandle_t handle, csrilu02Info_t info, int enable_boost, double *tol, hipDoubleComplex *boost_val)

hipsparseXcsrilu02_numericBoost enables the user to replace a numerical value in an incomplete LU factorization. tol is used to determine whether a numerical value is replaced by boost_val, such that \(A_{j,j} = \text{boost_val}\) if \(\text{tol} \ge \left|A_{j,j}\right|\).

Note

The boost value is enabled by setting enable_boost to 1 or disabled by setting enable_boost to 0.

Note

tol and boost_val can be in host or device memory.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• enable_boost – [in] enable/disable numeric boost.

• tol – [in] tolerance to determine whether a numerical value is replaced or not.

• boost_val – [in] boost value to replace a numerical value.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info, tol or boost_val pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXcsrilu02_bufferSize()

hipsparseStatus_t hipsparseScsrilu02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDcsrilu02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCcsrilu02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZcsrilu02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, int *pBufferSizeInBytes)

hipsparseXcsrilu02_bufferSize returns the size of the temporary storage buffer in bytes that is required by hipsparseXcsrilu02_analysis() and hipsparseXcsrilu02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseXcsrilu02_analysis() and hipsparseXcsrilu02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXcsrilu02_bufferSizeExt()

hipsparseStatus_t hipsparseScsrilu02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDcsrilu02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCcsrilu02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZcsrilu02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, size_t *pBufferSizeInBytes)

hipsparseXcsrilu02_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXcsrilu02_analysis() and hipsparseXcsrilu02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseXcsrilu02_analysis() and hipsparseXcsrilu02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXcsrilu02_analysis()

hipsparseStatus_t hipsparseScsrilu02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDcsrilu02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCcsrilu02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZcsrilu02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseXcsrilu02_analysis performs the analysis step for hipsparseXcsrilu02(). It is expected that this function will be executed only once for a given matrix and particular operation type.

Note

If the matrix sparsity pattern changes, the gathered information will become invalid.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXcsrilu02()

hipsparseStatus_t hipsparseScsrilu02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDcsrilu02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCcsrilu02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZcsrilu02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csrilu02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

Incomplete LU factorization with 0 fill-ins and no pivoting using CSR storage format.

hipsparseXcsrilu02 computes the incomplete LU factorization with 0 fill-ins and no pivoting of a sparse \(m \times m\) CSR matrix \(A\), such that

\[ A \approx LU \]

where the lower triangular matrix \(L\) and the upper triangular matrix \(U\) are computed using:

\[\begin{split} \begin{array}{ll} L_{ij} = \frac{1}{U_{jj}}(A_{ij} - \sum_{k=0}^{j-1}L_{ik} \times U_{kj}), & \text{if i > j} \\ U_{ij} = (A_{ij} - \sum_{k=0}^{j-1}L_{ik} \times U_{kj}), & \text{if i <= j} \end{array} \end{split}\]

for each entry found in the CSR matrix \(A\).

Computing the above incomplete \(LU\) factorization requires three steps to complete. First, the user determines the size of the required temporary storage buffer by calling hipsparseXcsrilu02_bufferSize(). Once this buffer size has been determined, the user allocates the buffer and passes it to hipsparseXcsrilu02_analysis(). This will perform analysis on the sparsity pattern of the matrix. Finally, the user calls hipsparseScsrilu02, hipsparseDcsrilu02, hipsparseCcsrilu02, or hipsparseZcsrilu02 to perform the actual factorization. The calculation of the buffer size and the analysis of the sparse matrix only need to be performed once for a given sparsity pattern while the factorization can be repeatedly applied to multiple matrices having the same sparsity pattern. Once all calls to hipsparseXcsrilu02() are complete, the temporary buffer can be deallocated.

When computing the \(LU\) factorization, it is possible that \(U_{jj} == 0\) which would result in a division by zero. This could occur from either \(A_{jj}\) not existing in the sparse CSR matrix (referred to as a structural zero) or because \(A_{ij} - \sum_{k=0}^{j-1}L_{ik} \times U_{kj} == 0\) (referred to as a numerical zero). For example, running the \(LU\) factorization on the following matrix:

\[\begin{split} \begin{bmatrix} 2 & 1 & 0 \\ 1 & 2 & 1 \\ 0 & 1 & 2 \end{bmatrix} \end{split}\]

results in a successful \(LU\) factorization, however running with the matrix:

\[\begin{split} \begin{bmatrix} 2 & 1 & 0 \\ 1 & 1/2 & 1 \\ 0 & 1 & 2 \end{bmatrix} \end{split}\]

results in a numerical zero because:

\[\begin{split} \begin{array}{ll} U_{00} &= 2 \\ U_{01} &= 1 \\ L_{10} &= \frac{1}{2} \\ U_{11} &= \frac{1}{2} - \frac{1}{2} &= 0 \end{array} \end{split}\]

The user can detect the presence of a structural zero by calling hipsparseXcsrilu02_zeroPivot() after hipsparseXcsrilu02_analysis() and/or the presence of a structural or numerical zero by calling hipsparseXcsrilu02_zeroPivot() after hipsparseXcsrilu02(). In both cases, hipsparseXcsrilu02_zeroPivot() will report the first zero pivot (either numerical or structural) found. See example below. The user can also set the diagonal type to be \(1\) using hipsparseSetMatDiagType() which will interpret the matrix \(A\) as having ones on its diagonal (even if no nonzero exists in the sparsity pattern).

hipsparseXcsrilu02 computes the \(LU\) factorization inplace meaning that the values array csrSortedValA_valM of the \(A\) matrix is overwritten with the \(L\) matrix stored in the strictly lower triangular part of \(A\) and the \(U\) matrix stored in the upper part of \(A\):

\[\begin{split} \begin{align} \begin{bmatrix} a_{00} & a_{01} & a_{02} \\ a_{10} & a_{11} & a_{12} \\ a_{20} & a_{21} & a_{22} \end{bmatrix} \rightarrow \begin{bmatrix} u_{00} & u_{01} & u_{02} \\ l_{10} & u_{11} & u_{12} \\ l_{20} & l_{21} & u_{22} \end{bmatrix} \end{align} \end{split}\]

The row pointer array csrSortedRowPtrA and the column indices array csrSortedColIndA remain the same for \(A\) and \(LU\) as the incomplete factorization does not generate new nonzeros in \(LU\) which do not already exist in \(A\).

The performance of computing \(LU\) factorization with hipSPARSE greatly depends on the sparisty pattern the the matrix \(A\) as this is what determines the amount of parallelism available.

Note

The sparse CSR matrix has to be sorted. This can be achieved by calling hipsparseXcsrsort().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA_valM – [inout] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [in] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA_valM, csrSortedRowPtrA or csrSortedColIndA pointer is invalid.

• HIPSPARSE_STATUS_ARCH_MISMATCH – the device is not supported.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXbsric02_zeroPivot()

hipsparseStatus_t hipsparseXbsric02_zeroPivot(hipsparseHandle_t handle, bsric02Info_t info, int *position)

hipsparseXbsric02_zeroPivot returns HIPSPARSE_STATUS_ZERO_PIVOT, if either a structural or numerical zero has been found during hipsparseXbsric02_analysis() or hipsparseXbsric02() computation. The first zero pivot \(j\) at \(A_{j,j}\) is stored in position, using same index base as the BSR matrix.

position can be in host or device memory. If no zero pivot has been found, position is set to -1 and HIPSPARSE_STATUS_SUCCESS is returned instead.

Note

If a zero pivot is found, position=j means that either the diagonal block A(j,j) is missing (structural zero) or the diagonal block A(j,j) is not positive definite (numerical zero).

Note

hipsparseXbsric02_zeroPivot is a blocking function. It might influence performance negatively.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• position – [inout] pointer to zero pivot \(j\), can be in host or device memory.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info or position pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_ZERO_PIVOT – zero pivot has been found.

hipsparseXbsric02_bufferSize()

hipsparseStatus_t hipsparseSbsric02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, float *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDbsric02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, double *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCbsric02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZbsric02_bufferSize(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipDoubleComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, int *pBufferSizeInBytes)

hipsparseXbsric02_bufferSize returns the size of the temporary storage buffer in bytes that is required by hipsparseXbsric02_analysis() and hipsparseXbsric02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specifies whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrValA – [in] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseSbsric02_analysis(), hipsparseDbsric02_analysis(), hipsparseCbsric02_analysis(), hipsparseZbsric02_analysis(), hipsparseSbsric02(), hipsparseDbsric02(), hipsparseCbsric02() and hipsparseZbsric02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrValA, bsrRowPtrA, bsrColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXbsric02_analysis()

hipsparseStatus_t hipsparseSbsric02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, const float *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDbsric02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, const double *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCbsric02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, const hipComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZbsric02_analysis(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, const hipDoubleComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseXbsric02_analysis performs the analysis step for hipsparseXbsric02(). It is expected that this function will be executed only once for a given matrix and particular operation type.

Note

If the matrix sparsity pattern changes, the gathered information will become invalid.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specified whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrValA – [in] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [out] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrValA, bsrRowPtrA, bsrColIndA, info or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXbsric02()

hipsparseStatus_t hipsparseSbsric02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, float *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDbsric02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, double *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCbsric02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZbsric02(hipsparseHandle_t handle, hipsparseDirection_t dirA, int mb, int nnzb, const hipsparseMatDescr_t descrA, hipDoubleComplex *bsrValA, const int *bsrRowPtrA, const int *bsrColIndA, int blockDim, bsric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

Incomplete Cholesky factorization with 0 fill-ins and no pivoting using BSR storage format.

hipsparseXbsric02 computes the incomplete Cholesky factorization with 0 fill-ins and no pivoting of a sparse \(mb \times mb\) BSR matrix \(A\), such that

\[ A \approx LL^T \]

Computing the above incomplete Cholesky factorization requires three steps to complete. First, the user determines the size of the required temporary storage buffer by calling hipsparseXbsric02_bufferSize(). Once this buffer size has been determined, the user allocates the buffer and passes it to hipsparseXbsric02_analysis(). This will perform analysis on the sparsity pattern of the matrix. Finally, the user calls hipsparseXbsric02 to perform the actual factorization. The calculation of the buffer size and the analysis of the sparse matrix only need to be performed once for a given sparsity pattern while the factorization can be repeatedly applied to multiple matrices having the same sparsity pattern. Once all calls to hipsparseXbsric02 are complete, the temporary buffer can be deallocated.

hipsparseXbsric02 requires a user allocated temporary buffer. Its size is returned by hipsparseXbsric02_bufferSize(). Furthermore, analysis meta data is required. It can be obtained by hipsparseXbsric02_analysis(). hipsparseXbsric02 reports the first zero pivot (either numerical or structural zero). The zero pivot status can be obtained by calling hipsparseXbsric02_zeroPivot().

hipsparseXbsric02 reports the first zero pivot (either numerical or structural zero). The zero pivot status can be obtained by calling hipsparseXbsric02_zeroPivot().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• dirA – [in] direction that specified whether to count nonzero elements by HIPSPARSE_DIRECTION_ROW or by HIPSPARSE_DIRECTION_COLUMN.

• mb – [in] number of block rows in the sparse BSR matrix.

• nnzb – [in] number of non-zero block entries of the sparse BSR matrix.

• descrA – [in] descriptor of the sparse BSR matrix.

• bsrValA – [inout] array of length nnzb*blockDim*blockDim containing the values of the sparse BSR matrix.

• bsrRowPtrA – [in] array of mb+1 elements that point to the start of every block row of the sparse BSR matrix.

• bsrColIndA – [in] array of nnzb elements containing the block column indices of the sparse BSR matrix.

• blockDim – [in] the block dimension of the BSR matrix. Between 1 and m where m=mb*blockDim.

• info – [in] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, mb, nnzb, blockDim, descrA, bsrValA, bsrRowPtrA, or bsrColIndA pointer is invalid.

• HIPSPARSE_STATUS_ARCH_MISMATCH – the device is not supported.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXcsric02_zeroPivot()

hipsparseStatus_t hipsparseXcsric02_zeroPivot(hipsparseHandle_t handle, csric02Info_t info, int *position)

hipsparseXcsric02_zeroPivot returns HIPSPARSE_STATUS_ZERO_PIVOT, if either a structural or numerical zero has been found during hipsparseXcsric02_analysis() or hipsparseXcsric02() computation. The first zero pivot \(j\) at \(A_{j,j}\) is stored in position, using same index base as the CSR matrix.

position can be in host or device memory. If no zero pivot has been found, position is set to -1 and HIPSPARSE_STATUS_SUCCESS is returned instead.

Note

hipsparseXcsric02_zeroPivot is a blocking function. It might influence performance negatively.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• info – [in] structure that holds the information collected during the analysis step.

• position – [inout] pointer to zero pivot \(j\), can be in host or device memory.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, info or position pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_ZERO_PIVOT – zero pivot has been found.

hipsparseXcsric02_bufferSize()

hipsparseStatus_t hipsparseScsric02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDcsric02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCcsric02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, int *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZcsric02_bufferSize(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, int *pBufferSizeInBytes)

hipsparseXcsric02_bufferSize returns the size of the temporary storage buffer in bytes that is required by hipsparseXcsric02_analysis() and hipsparseXcsric02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseXcsric02_analysis() and hipsparseXcsric02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXcsric02_bufferSizeExt()

hipsparseStatus_t hipsparseScsric02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDcsric02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCcsric02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZcsric02_bufferSizeExt(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, size_t *pBufferSizeInBytes)

hipsparseXcsric02_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXcsric02_analysis() and hipsparseXcsric02(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseXcsric02_analysis() and hipsparseXcsric02().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXcsric02_analysis()

hipsparseStatus_t hipsparseScsric02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const float *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDcsric02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const double *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCcsric02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const hipComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZcsric02_analysis(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, const hipDoubleComplex *csrSortedValA, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseXcsric02_analysis performs the analysis step for hipsparseXcsric02().

Note

If the matrix sparsity pattern changes, the gathered information will become invalid.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA – [in] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [out] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA, csrSortedRowPtrA, csrSortedColIndA, info or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXcsric02()

hipsparseStatus_t hipsparseScsric02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, float *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseDcsric02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, double *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseCcsric02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipComplex *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

hipsparseStatus_t hipsparseZcsric02(hipsparseHandle_t handle, int m, int nnz, const hipsparseMatDescr_t descrA, hipDoubleComplex *csrSortedValA_valM, const int *csrSortedRowPtrA, const int *csrSortedColIndA, csric02Info_t info, hipsparseSolvePolicy_t policy, void *pBuffer)

Incomplete Cholesky factorization with 0 fill-ins and no pivoting using CSR storage format.

hipsparseXcsric02 computes the incomplete Cholesky factorization with 0 fill-ins and no pivoting of a sparse \(m \times m\) CSR matrix \(A\), such that

\[ A \approx LL^T \]

where the lower triangular matrix \(L\) is computed using:

\[\begin{split} L_{ij} = \left\{ \begin{array}{ll} \sqrt{A_{jj} - \sum_{k=0}^{j-1}(L_{jk})^{2}}, & \text{if i == j} \\ \frac{1}{L_{jj}}(A_{jj} - \sum_{k=0}^{j-1}L_{ik} \times L_{jk}), & \text{if i > j} \end{array} \right. \end{split}\]

for each entry found in the CSR matrix \(A\).

Computing the above incomplete Cholesky factorization requires three steps to complete. First, the user determines the size of the required temporary storage buffer by calling hipsparseXcsric02_bufferSize(). Once this buffer size has been determined, the user allocates the buffer and passes it to hipsparseXcsric02_analysis(). This will perform analysis on the sparsity pattern of the matrix. Finally, the user calls hipsparseScsric02, hipsparseDcsric02, hipsparseCcsric02, or hipsparseZcsric02 to perform the actual factorization. The calculation of the buffer size and the analysis of the sparse matrix only need to be performed once for a given sparsity pattern while the factorization can be repeatedly applied to multiple matrices having the same sparsity pattern. Once all calls to hipsparseXcsric02() are complete, the temporary buffer can be deallocated.

When computing the Cholesky factorization, it is possible that \(L_{jj} == 0\) which would result in a division by zero. This could occur from either \(A_{jj}\) not existing in the sparse CSR matrix (referred to as a structural zero) or because \(A_{jj} - \sum_{k=0}^{j-1}(L_{jk})^{2} == 0\) (referred to as a numerical zero). For example, running the Cholesky factorization on the following matrix:

\[\begin{split} \begin{bmatrix} 2 & 1 & 0 \\ 1 & 2 & 1 \\ 0 & 1 & 2 \end{bmatrix} \end{split}\]

results in a successful Cholesky factorization, however running with the matrix:

\[\begin{split} \begin{bmatrix} 2 & 1 & 0 \\ 1 & 1/2 & 1 \\ 0 & 1 & 2 \end{bmatrix} \end{split}\]

results in a numerical zero because:

\[\begin{split} \begin{array}{ll} L_{00} &= \sqrt{2} \\ L_{10} &= \frac{1}{\sqrt{2}} \\ L_{11} &= \sqrt{\frac{1}{2} - (\frac{1}{\sqrt{2}})^2} &= 0 \end{array} \end{split}\]

The user can detect the presence of a structural zero by calling hipsparseXcsric02_zeroPivot() after hipsparseXcsric02_analysis() and/or the presence of a structural or numerical zero by calling hipsparseXcsric02_zeroPivot() after hipsparseXcsric02():

hipsparseDcsric02(handle,
                  m,
                  nnz,
                  descrM,
                  csrVal,
                  csrRowPtr,
                  csrColInd,
                  info,
                  HIPSPARSE_SOLVE_POLICY_USE_LEVEL,
                  buffer);

// Check for zero pivot
if(CUSPARSE_STATUS_ZERO_PIVOT == hipsparseXcsric02_zeroPivot(handle, info, &position))
{
    printf("L has structural and/or numerical zero at L(%d,%d)\n", position, position);
}

In both cases, hipsparseXcsric02_zeroPivot() will report the first zero pivot (either numerical or structural) found. See full example below. The user can also set the diagonal type to be \(1\) using hipsparseSetMatDiagType() which will interpret the matrix \(A\) as having ones on its diagonal (even if no nonzero exists in the sparsity pattern).

hipsparseXcsric02 computes the Cholesky factorization inplace meaning that the values array csrSortedValA_valM of the \(A\) matrix is overwritten with the \(L\) matrix stored in the lower triangular part of \(A\):

\[\begin{split} \begin{align} \begin{bmatrix} a_{00} & a_{01} & a_{02} \\ a_{10} & a_{11} & a_{12} \\ a_{20} & a_{21} & a_{22} \end{bmatrix} \rightarrow \begin{bmatrix} l_{00} & a_{01} & a_{02} \\ l_{10} & l_{11} & a_{12} \\ l_{20} & l_{21} & l_{22} \end{bmatrix} \end{align} \end{split}\]

The row pointer array csrSortedRowPtrA and the column indices array csrSortedColIndA remain the same for \(A\) and the output as the incomplete factorization does not generate new nonzeros in the output which do not already exist in \(A\).

The performance of computing Cholesky factorization with hipSPARSE greatly depends on the sparisty pattern the the matrix \(A\) as this is what determines the amount of parallelism available.

Note

The sparse CSR matrix has to be sorted. This can be achieved by calling hipsparseXcsrsort().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] number of rows of the sparse CSR matrix.

• nnz – [in] number of non-zero entries of the sparse CSR matrix.

• descrA – [in] descriptor of the sparse CSR matrix.

• csrSortedValA_valM – [inout] array of nnz elements of the sparse CSR matrix.

• csrSortedRowPtrA – [in] array of m+1 elements that point to the start of every row of the sparse CSR matrix.

• csrSortedColIndA – [in] array of nnz elements containing the column indices of the sparse CSR matrix.

• info – [in] structure that holds the information collected during the analysis step.

• policy – [in] HIPSPARSE_SOLVE_POLICY_NO_LEVEL or HIPSPARSE_SOLVE_POLICY_USE_LEVEL.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, nnz, descrA, csrSortedValA_valM, csrSortedRowPtrA or csrSortedColIndA pointer is invalid.

• HIPSPARSE_STATUS_ARCH_MISMATCH – the device is not supported.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

• HIPSPARSE_STATUS_NOT_SUPPORTED – hipsparseMatrixType_t != HIPSPARSE_MATRIX_TYPE_GENERAL.

hipsparseXgtsv2_bufferSizeExt()

hipsparseStatus_t hipsparseSgtsv2_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const float *dl, const float *d, const float *du, const float *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDgtsv2_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const double *dl, const double *d, const double *du, const double *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCgtsv2_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const hipComplex *dl, const hipComplex *d, const hipComplex *du, const hipComplex *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZgtsv2_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, const hipDoubleComplex *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseSgtsv2_bufferSizeExt returns the size of the temporary storage buffer that is required by hipsparseXgtsv2(). The temporary storage buffer must be allocated by the user.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Note

This routine supports execution in a hipGraph context.

Parameters:

• handle – [in] handle to the hipSPARSE library context queue.

• m – [in] size of the tri-diagonal linear system (must be >= 2).

• n – [in] number of columns in the dense matrix B.

• dl – [in] lower diagonal of tri-diagonal system. First entry must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. Last entry must be zero.

• B – [in] Dense matrix of size ( ldb, n ).

• ldb – [in] Leading dimension of B. Must satisfy ldb >= max(1, m).

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseXgtsv2().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, n, ldb, dl, d, du, B or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsv2()

hipsparseStatus_t hipsparseSgtsv2(hipsparseHandle_t handle, int m, int n, const float *dl, const float *d, const float *du, float *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseDgtsv2(hipsparseHandle_t handle, int m, int n, const double *dl, const double *d, const double *du, double *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseCgtsv2(hipsparseHandle_t handle, int m, int n, const hipComplex *dl, const hipComplex *d, const hipComplex *du, hipComplex *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseZgtsv2(hipsparseHandle_t handle, int m, int n, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, hipDoubleComplex *B, int ldb, void *pBuffer)

Tridiagonal solver with pivoting.

hipsparseXgtsv2 solves a tridiagonal system for multiple right hand sides using pivoting

\[ T*B = B \]

where \(T\) is a sparse tridiagonal matrix and \(B\) is a dense \(ldb \times n\) matrix storing the right-hand side vectors in column order. The tridiagonal matrix \(T\) is defined by three vectors: dl for the lower diagonal, d for the main diagonal and du for the upper diagonal.

Solving the tridiagonal system involves two steps. First, the user calls hipsparseXgtsv2_bufferSizeExt() in order to determine the size of the required temporary storage buffer. Once determined, the user allocates this buffer and passes it to hipsparseXgtsv2() to perform the actual solve. The \(B\) dense matrix, which initially stores the n right-hand side vectors, is overwritten with the n solution vectors after the call to hipsparseXgtsv2().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Note

This routine supports execution in a hipGraph context.

Parameters:

• handle – [in] handle to the hipSPARSE library context queue.

• m – [in] size of the tri-diagonal linear system (must be >= 2).

• n – [in] number of columns in the dense matrix B.

• dl – [in] lower diagonal of tri-diagonal system. First entry must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. Last entry must be zero.

• B – [inout] Dense matrix of size ( ldb, n ).

• ldb – [in] Leading dimension of B. Must satisfy ldb >= max(1, m).

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, n, ldb, dl, d, du, B or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsv2_nopivot_bufferSizeExt()

hipsparseStatus_t hipsparseSgtsv2_nopivot_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const float *dl, const float *d, const float *du, const float *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDgtsv2_nopivot_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const double *dl, const double *d, const double *du, const double *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCgtsv2_nopivot_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const hipComplex *dl, const hipComplex *d, const hipComplex *du, const hipComplex *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZgtsv2_nopivot_bufferSizeExt(hipsparseHandle_t handle, int m, int n, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, const hipDoubleComplex *B, int ldb, size_t *pBufferSizeInBytes)

hipsparseXgtsv2_nopivot_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXgtsv2_nopivot(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] size of the tri-diagonal linear system (must be >= 2).

• n – [in] number of columns in the dense matrix B.

• dl – [in] lower diagonal of tri-diagonal system. First entry must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. Last entry must be zero.

• B – [in] Dense matrix of size ( ldb, n ).

• ldb – [in] Leading dimension of B. Must satisfy ldb >= max(1, m).

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseSgtsv2_nopivot “hipsparseXgtsv2_nopivot()”.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, n, ldb, dl, d, du, B or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsv2_nopivot()

hipsparseStatus_t hipsparseSgtsv2_nopivot(hipsparseHandle_t handle, int m, int n, const float *dl, const float *d, const float *du, float *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseDgtsv2_nopivot(hipsparseHandle_t handle, int m, int n, const double *dl, const double *d, const double *du, double *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseCgtsv2_nopivot(hipsparseHandle_t handle, int m, int n, const hipComplex *dl, const hipComplex *d, const hipComplex *du, hipComplex *B, int ldb, void *pBuffer)

hipsparseStatus_t hipsparseZgtsv2_nopivot(hipsparseHandle_t handle, int m, int n, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, hipDoubleComplex *B, int ldb, void *pBuffer)

Tridiagonal solver (no pivoting)

hipsparseXgtsv2_nopivot solves a tridiagonal linear system for multiple right-hand sides without pivoting

\[ T*B = B \]

where \(T\) is a sparse tridiagonal matrix and \(B\) is a dense \(ldb \times n\) matrix storing the right-hand side vectors in column order. The tridiagonal matrix \(T\) is defined by three vectors: dl for the lower diagonal, d for the main diagonal and du for the upper diagonal.

Solving the tridiagonal system with multiple right-hand sides without pivoting involves two steps. First, the user calls hipsparseXgtsv2_nopivot_bufferSizeExt() in order to determine the size of the required temporary storage buffer. Once determined, the user allocates this buffer and passes it to hipsparseXgtsv2_nopivot() to perform the actual solve. The \(B\) dense matrix, which initially stores the n right-hand side vectors, is overwritten with the n solution vectors after the call to hipsparseXgtsv2_nopivot().

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] size of the tri-diagonal linear system (must be >= 2).

• n – [in] number of columns in the dense matrix B.

• dl – [in] lower diagonal of tri-diagonal system. First entry must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. Last entry must be zero.

• B – [inout] Dense matrix of size ( ldb, n ).

• ldb – [in] Leading dimension of B. Must satisfy ldb >= max(1, m).

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, n, ldb, dl, d, du, B or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsv2StridedBatch_bufferSizeExt()

hipsparseStatus_t hipsparseSgtsv2StridedBatch_bufferSizeExt(hipsparseHandle_t handle, int m, const float *dl, const float *d, const float *du, const float *x, int batchCount, int batchStride, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDgtsv2StridedBatch_bufferSizeExt(hipsparseHandle_t handle, int m, const double *dl, const double *d, const double *du, const double *x, int batchCount, int batchStride, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCgtsv2StridedBatch_bufferSizeExt(hipsparseHandle_t handle, int m, const hipComplex *dl, const hipComplex *d, const hipComplex *du, const hipComplex *x, int batchCount, int batchStride, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZgtsv2StridedBatch_bufferSizeExt(hipsparseHandle_t handle, int m, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, const hipDoubleComplex *x, int batchCount, int batchStride, size_t *pBufferSizeInBytes)

hipsparseXgtsv2StridedBatch_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXgtsv2StridedBatch(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] size of the tri-diagonal linear system.

• dl – [in] lower diagonal of tri-diagonal system where the ith system lower diagonal starts at dl+batchStride*i.

• d – [in] main diagonal of tri-diagonal system where the ith system diagonal starts at d+batchStride*i.

• du – [in] upper diagonal of tri-diagonal system where the ith system upper diagonal starts at du+batchStride*i.

• x – [inout] Dense array of righthand-sides where the ith righthand-side starts at x+batchStride*i.

• batchCount – [in] The number of systems to solve.

• batchStride – [in] The number of elements that separate each system. Must satisfy batchStride >= m.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseSgtsv2StridedBatch “hipsparseXgtsv2StridedBatch()”.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, batchCount, batchStride, dl, d, du, x or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsv2StridedBatch()

hipsparseStatus_t hipsparseSgtsv2StridedBatch(hipsparseHandle_t handle, int m, const float *dl, const float *d, const float *du, float *x, int batchCount, int batchStride, void *pBuffer)

hipsparseStatus_t hipsparseDgtsv2StridedBatch(hipsparseHandle_t handle, int m, const double *dl, const double *d, const double *du, double *x, int batchCount, int batchStride, void *pBuffer)

hipsparseStatus_t hipsparseCgtsv2StridedBatch(hipsparseHandle_t handle, int m, const hipComplex *dl, const hipComplex *d, const hipComplex *du, hipComplex *x, int batchCount, int batchStride, void *pBuffer)

hipsparseStatus_t hipsparseZgtsv2StridedBatch(hipsparseHandle_t handle, int m, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, hipDoubleComplex *x, int batchCount, int batchStride, void *pBuffer)

Strided Batch tridiagonal solver (no pivoting)

hipsparseXgtsv2StridedBatch solves a batched tridiagonal linear system

\[ T^{i}*x^{i} = x^{i} \]

where for each batch \(i=0\ldots\) batchCount, \(T^{i}\) is a sparse tridiagonal matrix and \(x^{i}\) is a dense right-hand side vector. All of the tridiagonal matrices, \(T^{i}\), are packed one after the other into three vectors: dl for the lower diagonals, d for the main diagonals and du for the upper diagonals. See below for a description of what this strided memory pattern looks like.

Solving the batched tridiagonal system involves two steps. First, the user calls hipsparseXgtsv2StridedBatch_bufferSizeExt() in order to determine the size of the required temporary storage buffer. Once determined, the user allocates this buffer and passes it to hipsparseXgtsv2StridedBatch() to perform the actual solve. The \(x^{i}\) vectors, which initially stores the right-hand side values, are overwritten with the solution after the call to hipsparseXgtsv2StridedBatch().

The strided batch routines write each batch matrix one after the other in memory. For example, consider the following batch matrices:

\[\begin{split} \begin{bmatrix} t^{0}_{00} & t^{0}_{01} & 0 \\ t^{0}_{10} & t^{0}_{11} & t^{0}_{12} \\ 0 & t^{0}_{21} & t^{0}_{22} \end{bmatrix} \begin{bmatrix} t^{1}_{00} & t^{1}_{01} & 0 \\ t^{1}_{10} & t^{1}_{11} & t^{1}_{12} \\ 0 & t^{1}_{21} & t^{1}_{22} \end{bmatrix} \begin{bmatrix} t^{2}_{00} & t^{2}_{01} & 0 \\ t^{2}_{10} & t^{2}_{11} & t^{2}_{12} \\ 0 & t^{2}_{21} & t^{2}_{22} \end{bmatrix} \end{split}\]

In strided format, the upper, lower, and diagonal arrays would look like:

\[\begin{split} \begin{align} \text{lower} &= \begin{bmatrix} 0 & t^{0}_{10} & t^{0}_{21} & 0 & t^{1}_{10} & t^{1}_{21} & 0 & t^{2}_{10} & t^{2}_{21} \end{bmatrix} \\ \text{diagonal} &= \begin{bmatrix} t^{0}_{00} & t^{0}_{11} & t^{0}_{22} & t^{1}_{00} & t^{1}_{11} & t^{1}_{22} & t^{2}_{00} & t^{2}_{11} & t^{2}_{22} \end{bmatrix} \\ \text{upper} &= \begin{bmatrix} t^{0}_{01} & t^{0}_{12} & 0 & t^{1}_{01} & t^{1}_{12} & 0 & t^{2}_{01} & t^{2}_{12} & 0 \end{bmatrix} \\ \end{align} \end{split}\]

For the lower array, for each batch i, the i*batchStride entries are zero and for the upper array the i*batchStride+batchStride-1 entries are zero.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• m – [in] size of the tri-diagonal linear system (must be >= 2).

• dl – [in] lower diagonal of tri-diagonal system. First entry must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. Last entry must be zero.

• x – [inout] Dense array of righthand-sides where the ith righthand-side starts at x+batchStride*i.

• batchCount – [in] The number of systems to solve.

• batchStride – [in] The number of elements that separate each system. Must satisfy batchStride >= m.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, batchCount, batchStride, dl, d, du, x or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsvInterleavedBatch_bufferSizeExt()

hipsparseStatus_t hipsparseSgtsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const float *dl, const float *d, const float *du, const float *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDgtsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const double *dl, const double *d, const double *du, const double *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCgtsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const hipComplex *dl, const hipComplex *d, const hipComplex *du, const hipComplex *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZgtsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, const hipDoubleComplex *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseXgtsvInterleavedBatch_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXgtsvInterleavedBatch(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• algo – [in] Algorithm to use when solving tridiagonal systems. Options are thomas ( algo=0 ), LU ( algo=1 ), or QR ( algo=2 ). Thomas algorithm is the fastest but is not stable while LU and QR are slower but are stable.

• m – [in] size of the tri-diagonal linear system.

• dl – [in] lower diagonal of tri-diagonal system. The first element of the lower diagonal must be zero.

• d – [in] main diagonal of tri-diagonal system.

• du – [in] upper diagonal of tri-diagonal system. The last element of the upper diagonal must be zero.

• x – [inout] Dense array of righthand-sides with dimension batchCount by m.

• batchCount – [in] The number of systems to solve.

• pBufferSizeInBytes – [out] number of bytes of the temporary storage buffer required by hipsparseSgtsvInterleavedBatch().

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, batchCount, dl, d, du, x or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgtsvInterleavedBatch()

hipsparseStatus_t hipsparseSgtsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, float *dl, float *d, float *du, float *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseDgtsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, double *dl, double *d, double *du, double *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseCgtsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, hipComplex *dl, hipComplex *d, hipComplex *du, hipComplex *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseZgtsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, hipDoubleComplex *dl, hipDoubleComplex *d, hipDoubleComplex *du, hipDoubleComplex *x, int batchCount, void *pBuffer)

Interleaved Batch tridiagonal solver.

hipsparseXgtsvInterleavedBatch solves a batched tridiagonal linear system

\[ T^{i}*x^{i} = x^{i} \]

where for each batch \(i=0\ldots\) batchCount, \(T^{i}\) is a sparse tridiagonal matrix and \(x^{i}\) is a dense right-hand side vector. All of the tridiagonal matrices, \(T^{i}\), are packed in an interleaved fashion into three vectors: dl for the lower diagonals, d for the main diagonals and du for the upper diagonals. See below for a description of what this interleaved memory pattern looks like.

Solving the batched tridiagonal system involves two steps. First, the user calls hipsparseXgtsvInterleavedBatch_bufferSizeExt() in order to determine the size of the required temporary storage buffer. Once determined, the user allocates this buffer and passes it to hipsparseXgtsvInterleavedBatch() to perform the actual solve. The \(x^{i}\) vectors, which initially stores the right-hand side values, are overwritten with the solution after the call to hipsparseXgtsvInterleavedBatch().

The user can specify different algorithms for hipsparseXgtsvInterleavedBatch to use. Options are thomas ( algo=0 ), LU ( algo=1 ), or QR ( algo=2 ).

Unlike the strided batch routines which write each batch matrix one after the other in memory, the interleaved routines write the batch matrices such that each element from each matrix is written consecutively one after the other. For example, consider the following batch matrices:

\[\begin{split} \begin{bmatrix} t^{0}_{00} & t^{0}_{01} & 0 \\ t^{0}_{10} & t^{0}_{11} & t^{0}_{12} \\ 0 & t^{0}_{21} & t^{0}_{22} \end{bmatrix} \begin{bmatrix} t^{1}_{00} & t^{1}_{01} & 0 \\ t^{1}_{10} & t^{1}_{11} & t^{1}_{12} \\ 0 & t^{1}_{21} & t^{1}_{22} \end{bmatrix} \begin{bmatrix} t^{2}_{00} & t^{2}_{01} & 0 \\ t^{2}_{10} & t^{2}_{11} & t^{2}_{12} \\ 0 & t^{2}_{21} & t^{2}_{22} \end{bmatrix} \end{split}\]

In interleaved format, the upper, lower, and diagonal arrays would look like:

\[\begin{split} \begin{align} \text{lower} &= \begin{bmatrix} 0 & 0 & 0 & t^{0}_{10} & t^{1}_{10} & t^{1}_{10} & t^{0}_{21} & t^{1}_{21} & t^{2}_{21} \end{bmatrix} \\ \text{diagonal} &= \begin{bmatrix} t^{0}_{00} & t^{1}_{00} & t^{2}_{00} & t^{0}_{11} & t^{1}_{11} & t^{2}_{11} & t^{0}_{22} & t^{1}_{22} & t^{2}_{22} \end{bmatrix} \\ \text{upper} &= \begin{bmatrix} t^{0}_{01} & t^{1}_{01} & t^{2}_{01} & t^{0}_{12} & t^{1}_{12} & t^{2}_{12} & 0 & 0 & 0 \end{bmatrix} \\ \end{align} \end{split}\]

For the lower array, the first batchCount entries are zero and for the upper array the last batchCount entries are zero.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• algo – [in] Algorithm to use when solving tridiagonal systems. Options are thomas ( algo=0 ), LU ( algo=1 ), or QR ( algo=2 ). Thomas algorithm is the fastest but is not stable while LU and QR are slower but are stable.

• m – [in] size of the tri-diagonal linear system.

• dl – [inout] lower diagonal of tri-diagonal system. The first element of the lower diagonal must be zero.

• d – [inout] main diagonal of tri-diagonal system.

• du – [inout] upper diagonal of tri-diagonal system. The last element of the upper diagonal must be zero.

• x – [inout] Dense array of righthand-sides with dimension batchCount by m.

• batchCount – [in] The number of systems to solve.

• pBuffer – [in] temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, batchCount, dl, d, du, x or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgpsvInterleavedBatch_bufferSizeExt()

hipsparseStatus_t hipsparseSgpsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const float *ds, const float *dl, const float *d, const float *du, const float *dw, const float *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseDgpsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const double *ds, const double *dl, const double *d, const double *du, const double *dw, const double *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseCgpsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const hipComplex *ds, const hipComplex *dl, const hipComplex *d, const hipComplex *du, const hipComplex *dw, const hipComplex *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseStatus_t hipsparseZgpsvInterleavedBatch_bufferSizeExt(hipsparseHandle_t handle, int algo, int m, const hipDoubleComplex *ds, const hipDoubleComplex *dl, const hipDoubleComplex *d, const hipDoubleComplex *du, const hipDoubleComplex *dw, const hipDoubleComplex *x, int batchCount, size_t *pBufferSizeInBytes)

hipsparseXgpsvInterleavedBatch_bufferSizeExt returns the size of the temporary storage buffer in bytes that is required by hipsparseXgpsvInterleavedBatch(). The temporary storage buffer must be allocated by the user.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• algo – [in] algorithm to solve the linear system.

• m – [in] size of the pentadiagonal linear system.

• ds – [in] lower diagonal (distance 2) of pentadiagonal system. First two entries must be zero.

• dl – [in] lower diagonal of pentadiagonal system. First entry must be zero.

• d – [in] main diagonal of pentadiagonal system.

• du – [in] upper diagonal of pentadiagonal system. Last entry must be zero.

• dw – [in] upper diagonal (distance 2) of pentadiagonal system. Last two entries must be zero.

• x – [in] Dense array of right-hand-sides with dimension batchCount by m.

• batchCount – [in] The number of systems to solve.

• pBufferSizeInBytes – [out] Number of bytes of the temporary storage buffer required.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, alg, batchCount, ds, dl, d, du, dw, x or pBufferSizeInBytes pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.

hipsparseXgpsvInterleavedBatch()

hipsparseStatus_t hipsparseSgpsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, float *ds, float *dl, float *d, float *du, float *dw, float *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseDgpsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, double *ds, double *dl, double *d, double *du, double *dw, double *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseCgpsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, hipComplex *ds, hipComplex *dl, hipComplex *d, hipComplex *du, hipComplex *dw, hipComplex *x, int batchCount, void *pBuffer)

hipsparseStatus_t hipsparseZgpsvInterleavedBatch(hipsparseHandle_t handle, int algo, int m, hipDoubleComplex *ds, hipDoubleComplex *dl, hipDoubleComplex *d, hipDoubleComplex *du, hipDoubleComplex *dw, hipDoubleComplex *x, int batchCount, void *pBuffer)

Interleaved Batch pentadiagonal solver.

hipsparseXgpsvInterleavedBatch solves a batch of pentadiagonal linear systems

\[ P^{i}*x^{i} = x^{i} \]

where for each batch \(i=0\ldots\) batchCount, \(P^{i}\) is a sparse pentadiagonal matrix and \(x^{i}\) is a dense right-hand side vector. All of the pentadiagonal matrices, \(P^{i}\), are packed in an interleaved fashion into five vectors: ds for the lowest diagonals, dl for the lower diagonals, d for the main diagonals, du for the upper diagonals, and dw for the highest digaonals. See below for a description of what this interleaved memory pattern looks like.

Solving the batched pentadiagonal system involves two steps. First, the user calls hipsparseSgpsvInterleavedBatch_bufferSizeExt() in order to determine the size of the required temporary storage buffer. Once determined, the user allocates this buffer and passes it to hipsparseXgpsvInterleavedBatch() to perform the actual solve. The \(x^{i}\) vectors, which initially stores the right-hand side values, are overwritten with the solution after the call to hipsparseXgpsvInterleavedBatch().

Unlike the strided batch routines which write each batch matrix one after the other in memory, the interleaved routines write the batch matrices such that each element from each matrix is written consecutively one after the other. For example, consider the following batch matrices:

\[\begin{split} \begin{bmatrix} t^{0}_{00} & t^{0}_{01} & t^{0}_{02} \\ t^{0}_{10} & t^{0}_{11} & t^{0}_{12} \\ t^{0}_{20} & t^{0}_{21} & t^{0}_{22} \end{bmatrix} \begin{bmatrix} t^{1}_{00} & t^{1}_{01} & t^{1}_{02} \\ t^{1}_{10} & t^{1}_{11} & t^{1}_{12} \\ t^{1}_{20} & t^{1}_{21} & t^{1}_{22} \end{bmatrix} \begin{bmatrix} t^{2}_{00} & t^{2}_{01} & t^{2}_{02} \\ t^{2}_{10} & t^{2}_{11} & t^{2}_{12} \\ t^{2}_{20} & t^{2}_{21} & t^{2}_{22} \end{bmatrix} \end{split}\]

In interleaved format, the highest, higher, lowest, lower, and diagonal arrays would look like:

\[\begin{split} \begin{align} \text{lowest} &= \begin{bmatrix} 0 & 0 & 0 & 0 & 0 & 0 & t^{0}_{20} & t^{1}_{20} & t^{2}_{20} \end{bmatrix} \\ \text{lower} &= \begin{bmatrix} 0 & 0 & 0 & t^{0}_{10} & t^{1}_{10} & t^{1}_{10} & t^{0}_{21} & t^{1}_{21} & t^{2}_{21} \end{bmatrix} \\ \text{diagonal} &= \begin{bmatrix} t^{0}_{00} & t^{1}_{00} & t^{2}_{00} & t^{0}_{11} & t^{1}_{11} & t^{2}_{11} & t^{0}_{22} & t^{1}_{22} & t^{2}_{22} \end{bmatrix} \\ \text{higher} &= \begin{bmatrix} t^{0}_{01} & t^{1}_{01} & t^{2}_{01} & t^{0}_{12} & t^{1}_{12} & t^{2}_{12} & 0 & 0 & 0 \end{bmatrix} \\ \text{highest} &= \begin{bmatrix} t^{0}_{02} & t^{1}_{02} & t^{2}_{02} & 0 & 0 & 0 & 0 & 0 & 0 \end{bmatrix} \\ \end{align} \end{split}\]

For the lowest array, the first 2*batchCount entries are zero, for the lower array, the first batchCount entries are zero, for the upper array the last batchCount entries are zero, and for the highest array, the last 2*batchCount entries are zero.

Note

This function is non blocking and executed asynchronously with respect to the host. It may return before the actual computation has finished.

Parameters:

• handle – [in] handle to the hipsparse library context queue.

• algo – [in] algorithm to solve the linear system.

• m – [in] size of the pentadiagonal linear system.

• ds – [inout] lower diagonal (distance 2) of pentadiagonal system. First two entries must be zero.

• dl – [inout] lower diagonal of pentadiagonal system. First entry must be zero.

• d – [inout] main diagonal of pentadiagonal system.

• du – [inout] upper diagonal of pentadiagonal system. Last entry must be zero.

• dw – [inout] upper diagonal (distance 2) of pentadiagonal system. Last two entries must be zero.

• x – [inout] Dense array of right-hand-sides with dimension batchCount by m.

• batchCount – [in] The number of systems to solve.

• pBuffer – [in] Temporary storage buffer allocated by the user.

Return values:

• HIPSPARSE_STATUS_SUCCESS – the operation completed successfully.

• HIPSPARSE_STATUS_INVALID_VALUE – handle, m, alg, batchCount, ds, dl, d, du, dw, x or pBuffer pointer is invalid.

• HIPSPARSE_STATUS_INTERNAL_ERROR – an internal error occurred.