Neural Net Model Compiler & Optimizer#

Neural Net Model Compiler & Optimizer converts pre-trained neural network models to MIVisionX runtime code for optimized inference.

Pre-trained models in ONNX, NNEF, & Caffe formats are supported by the model compiler & optimizer. The model compiler first converts the pre-trained models to AMD Neural Net Intermediate Representation (NNIR), once the model has been translated into AMD NNIR (AMD’s internal open format), the Optimizer goes through the NNIR and applies various optimizations which would allow the model to be deployed on to target hardware most efficiently. Finally, AMD NNIR is converted into OpenVX C code, which could be compiled and deployed on any targeted AMD hardware.

MIVisionX RunTime#

MIVisionX allows hundreds of different OpenVX and OpenCV interop vision functions to be directly added into the OpenVX C code generated by the model compiler & optimizer for preprocessing the input to the neural network model and post-processing the model results, hence allowing users to create an end to end solution to be deployed on any targeted AMD hardware.

Pre-requisites#

  • Linux

    • Ubuntu 20.04 / 22.04

    • CentOS 7 / 8

    • RHEL 8 / 9

  • MIVisionX installed

  • Linux Packages

    • Ubuntu

    sudo apt-get -y install python3 python3-pip protobuf-compiler libprotoc-dev
    
    • CentOS

    sudo yum -y python3-devel python3-pip protobuf python3-protobuf
    
  • PIP3 Packages

    sudo pip3 install future==0.18.2 pytz==2022.1 numpy==1.21
    

Note: MIVisionX installs model compiler scripts at /opt/rocm/libexec/mivisionx/model_compiler/python/

Caffe#

  • protobuf

  • google

sudo pip3 install google==3.0.0 protobuf==3.12.4

ONNX#

  • protobuf

  • onnx

sudo pip3 install protobuf==3.12.4 onnx==1.11.0

Note:

NNEF#

git clone https://github.com/KhronosGroup/NNEF-Tools.git
cd NNEF-Tools/parser/cpp
mkdir -p build && cd build
cmake ../
make
cd ../../../python
sudo python3 setup.py install

Note: NNEF Models are available at NNEF Model Zoo

Model Compiler Samples - Run Efficient Inference#

In this sample, we will learn how to run inference efficiently using OpenVX and OpenVX Extensions. The sample will go over each step required to convert a pre-trained neural net model into an OpenVX Graph and run this graph efficiently on any target hardware. In this sample, we will also learn about AMD MIVisionX which delivers open source implementation of OpenVX and OpenVX Extensions along with MIVisionX Neural Net Model Compiler & Optimizer.

Model Compiler & Optimizer Usage#

Step 1 - Convert Pre-trained model to AMD NNIR#

Caffe#

To convert a pre-trained caffemodel into AMD NNIR model:

% python3 caffe_to_nnir.py <net.caffeModel> <nnirOutputFolder> --input-dims <n,c,h,w> [OPTIONS]

OPTIONS:
	--verbose <0|1> [defualt: 0]
	--node_type_append <0|1> [default: 0; appends node type name to output names

ONNX#

To convert an ONNX model into AMD NNIR model:

% python3 onnx_to_nnir.py <model.onnx> <nnirModelFolder> [OPTIONS]

OPTIONS:
	--input_dims n,c,h,w
	--node_type_append <0|1> [default: 0; appends node type name to output names]

NNEF#

To convert a NNEF model into AMD NNIR model:

% python3 nnef_to_nnir.py <nnefInputFolder> <nnirOutputFolder> [OPTIONS]

OPTIONS:
	--node_type_append <0|1> [default: 0; appends node type name to output names]

Note: If you want to create NNEF models from pre-trained caffe or tensorflow models, use NNEF Converter or try NNEF models at NNEF Model Zoo

Step 2 - Apply Optimizations#

To update batch size in AMD NNIR model:

% python3 nnir_update.py --batch-size <N> <nnirModelFolder> <nnirModelFolderN>

To fuse operations in AMD NNIR model (like batch normalization into convolution):

% python3 nnir_update.py --fuse-ops <1> <nnirModelFolderN> <nnirModelFolderFused>

To quantize the model to float 16

% python3 nnir_update.py --convert-fp16 <1> <nnirModelFolderN> <nnirModelFolderFused>

To workaround groups using slice and concat operations in AMD NNIR model:

% python3 nnir_update.py --slice-groups <1> <nnirModelFolderFused> <nnirModelFolderSliced>

Step 3 - Convert AMD NNIR to OpenVX C code#

To convert an AMD NNIR model into OpenVX C code:

% python3 nnir_to_openvx.py --help

Usage: python nnir_to_openvx.py [OPTIONS] <nnirInputFolder> <outputFolder>

  OPTIONS:
    --argmax UINT8                    -- argmax at the end with 8-bit output
    --argmax UINT16                   -- argmax at the end with 16-bit output
    --argmax <fileNamePrefix>rgb.txt  -- argmax at the end with RGB color mapping using LUT
    --argmax <fileNamePrefix>rgba.txt -- argmax at the end with RGBA color mapping using LUT
    --help                            -- show this help message

  LUT File Format (RGB): 8-bit R G B values one per each label in text format
    R0 G0 B0
    R1 G1 B1
    ...

  LUT File Format (RGBA): 8-bit R G B A values one per each label in text format
    R0 G0 B0 A0
    R1 G1 B1 A1
    ...

Sample workflow for Model Compiler#

Trained Caffe Model conversion to AMD NNIR to OpenVX Graph#

  • Step 1: Convert net.caffemodel into NNIR model using the following command

% python3 caffe_to_nnir.py <net.caffeModel> <nnirOutputFolder> --input-dims n,c,h,w [--verbose 0|1]
  • Step 2: Compile NNIR model into OpenVX C code with CMakelists.txt for compiling and building inference library

% python3 nnir_to_openvx.py <nnirModelFolder> <nnirModelOutputFolder>
  • Step 3: cmake and make the project inside the nnirModelOutputFolder

% cd nnirModelOutputFolder
% cmake .
% make
  • Step 4: Run anntest application for testing the inference with input and output tensor

% ./anntest weights.bin
  • Step 5: The shared C library (libannmodule.so) can be used in any customer application

Examples for OpenVX C code generation#

Generate OpenVX and test code that can be used dump and compare raw tensor data:

% python3 nnir_to_openvx.py nnirInputFolderFused openvxCodeFolder
% mkdir openvxCodeFolder/build
% cd openvxCodeFolder/build
% cmake ..
% make
% ./anntest

Usage: anntest <weights.bin> [<input-data-file(s)> [<output-data-file(s)>]]<--add ADD> <--multiply MULTIPLY>]

   <input-data-file>: is filename to initialize tensor
     .jpg or .png: decode and initialize for 3 channel tensors
         (use %04d in fileName to when batch-size > 1: batch index starts from 0)
     other: initialize tensor with raw data from the file

   <output-data-file>[,<reference-for-compare>,<maxErrorLimit>,<rmsErrorLimit>]:
     <referece-to-compare> is raw tensor data for comparision
     <maxErrorLimit> is max absolute error allowed
     <rmsErrorLimit> is max RMS error allowed
     <output-data-file> is filename for saving output tensor data
       '-' to ignore
       other: save raw tensor into the file
       
   <add>: input preprocessing factor [optional - default:[0,0,0]]
   
   <multiply>: input preprocessing factor [optional - default:[1,1,1]]

% ./anntest ../weights.bin input.f32 output.f32,reference.f32,1e-6,1e-9 --add -2.1,-2.07,-1.8 --multiply 0.017,0.017,0.017
...

Generate OpenVX and test code with argmax that can be used dump and compare 16-bit argmax output tensor:

% python3 nnir_to_openvx.py --argmax UINT16 nnirInputFolderFused openvxCodeFolder
% mkdir openvxCodeFolder/build
% cd openvxCodeFolder/build
% cmake ..
% make
% ./anntest

Usage: anntest <weights.bin> [<input-data-file(s)> [<output-data-file(s)>]]]

   <input-data-file>: is filename to initialize tensor
     .jpg or .png: decode and initialize for 3 channel tensors
         (use %04d in fileName to when batch-size > 1: batch index starts from 0)
     other: initialize tensor with raw data from the file

   <output-data-file>[,<reference-for-compare>,<percentErrorLimit>]:
     <referece-to-compare> is raw tensor data of argmax output for comparision
     <percentMismatchLimit> is max mismatch (percentage) allowed
     <output-data-file> is filename for saving output tensor data
       '-' to ignore
       other: save raw tensor into the file

% ./anntest ../weights.bin input-%04d.png output.u16,reference.u16,0.01
...

Generate OpenVX and test code with argmax and LUT that is designed for semantic segmentation use cases. You can dump output in raw format or PNGs and additionally compare with reference data in raw format.

% python3 nnir_to_openvx.py --argmax lut-rgb.txt nnirInputFolderFused openvxCodeFolder
% mkdir openvxCodeFolder/build
% cd openvxCodeFolder/build
% cmake ..
% make
% ./anntest

Usage: anntest <weights.bin> [<input-data-file(s)> [<output-data-file(s)>]]]

   <input-data-file>: is filename to initialize tensor
     .jpg or .png: decode and initialize for 3 channel tensors
         (use %04d in fileName to when batch-size > 1: batch index starts from 0)
     other: initialize tensor with raw data from the file

   <output-data-file>[,<reference-for-compare>,<percentErrorLimit>]:
     <referece-to-compare> is raw tensor data of LUT output for comparision
     <percentMismatchLimit> is max mismatch (percentage) allowed
     <output-data-file> is filename for saving output tensor data
       .png: save LUT output as PNG file(s)
         (use %04d in fileName when batch-size > 1: batch index starts from 0)
       '-' to ignore
       other: save raw tensor into the file

% ./anntest ../weights.bin input-%04d.png output.rgb,reference.rgb,0.01
...
% ./anntest ../weights.bin input-%04d.png output-%04d.png,reference.rgb,0.01
...

Test code with preprocessing add / multiply values to normalize the input tensor. Some models(e.g. Inception v4) require input tensor to be normalized. You can pass the preprocessing values using –add & –multiply option.

% ./anntest ../weights.bin input.f32 output.f32 --add -2.1,-2.07,-1.8 --multiply 0.017,0.017,0.017
...

Models & Operators currently supported#

Models#

Networks

Caffe

ONNX

NNEF

AlexNet

Caffenet

DenseNet

Googlenet

Inception-V1

Inception-V2

Inception-V3

Inception-V4

MNIST

Mobilenet

MobilenetV2

ResNet-18

ResNet-34

ResNet-50

ResNet-101

ResNet-152

ResNetV2-18

ResNetV2-34

ResNetV2-50

ResNetV2-101

Squeezenet

Tiny-Yolo-V2

VGGNet-16

VGGNet-19

Yolo-V3

ZFNet

Note: Currently supporting ONNX models with release 1.1 and release 1.3 tags

Operators#

Layers

Caffe

ONNX

NNEF

Add

Argmax

AveragePool

BatchNormalization

Cast

Clamp

Clip

Concat

Constant

Conv

ConvTranspose

Copy

Crop

CropAndResize

Deconv

DetectionOutput

Div

Dropout

Eltwise

Exp

Equal

Flatten

Gather

GEMM

GlobalAveragePool

Greater

GreaterOrEqual

InnerProduct

Interp

LeakyRelu

Less

LessOrEqual

Linear

Log

LRN

Matmul

Max

MaxPool

MeanReduce

Min

Mul

MulAdd

NonMaxSuppression

Permute

PriorBox

ReduceMin

Relu

Reshape

Shape

Sigmoid

Slice

Split

Softmax

SoftmaxWithLoss

Squeeze

Sub

Sum

Tile

TopK

Transpose

Unsqueeze

Upsample

Contributing to Model Compiler#

We welcome contributions to Model Compiler to extend the functionalities and add support to more layers and models. When contributing to this repository, please first discuss the changes you wish to make via issues and then submit a pull request.